- 您現在的位置：買賣IC網 > PDF目錄374032 > ADSP-21062LKS-160 (ANALOG DEVICES INC) ADSP-2106x SHARC DSP Microcomputer Family PDF資料下載
參數資料
| 型號： | ADSP-21062LKS-160 |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | 數字信號處理 |
| 英文描述： | ADSP-2106x SHARC DSP Microcomputer Family |
| 中文描述： | 48-BIT, 40 MHz, OTHER DSP, PQFP240 |
| 封裝： | MS-029GA, MQFP-240 |
| 文件頁數： | 5/48頁 |
| 文件大小： | 370K |
| 代理商： | ADSP-21062LKS-160 |
第1頁第2頁第3頁第4頁當前第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁
ADSP-21062/ADSP-21062L
–5–
REV. C
include interrupt generation upon completion of DMA trans-
fers and DMA chaining for automatic linked DMA transfers.
Serial Ports
The ADSP-21062 features two synchronous serial ports that
provide an inexpensive interface to a wide variety of digital and
mixed-signal peripheral devices. The serial ports can operate at
the full clock rate of the processor, providing each with a maxi-
mum data rate of 40 Mbit/s. Independent transmit and receive
functions provide greater flexibility for serial communications.
Serial port data can be automatically transferred to and from
on-chip memory via DMA. Each of the serial ports offers TDM
multichannel mode.
The serial ports can operate with little-endian or big-endian
transmission formats, with word lengths selectable from 3 bits to
32 bits. They offer selectable synchronization and transmit
modes as well as optional
μ
-law or A-law companding. Serial
port clocks and frame syncs can be internally or externally
generated.
Multiprocessing
The ADSP-21062 offers powerful features tailored to multi-
processor DSP systems. The unified address space (see
Figure 4) allows direct interprocessor accesses of each ADSP-
21062’s internal memory. Distributed bus arbitration logic is
included on-chip for simple, glueless connection of systems
containing up to six ADSP-21062s and a host processor. Master
processor changeover incurs only one cycle of overhead. Bus
arbitration is selectable as either fixed or rotating priority. Bus lock
allows indivisible
read-modify-write
sequences for semaphores. A
vector interrupt is provided for interprocessor commands. Maxi-
mum throughput for interprocessor data transfer is 240 Mbytes/s
over the link ports or external port.
Broadcast writes
allow simulta-
neous transmission of data to all ADSP-21062s and can be used
to implement reflective semaphores.
Link Ports
The ADSP-21062 features six 4-bit link ports that provide addi-
tional I/O capabilities. The link ports can be clocked twice per
cycle, allowing each to transfer eight bits of data per cycle. Link
port I/O is especially useful for point-to-point interprocessor
communication in multiprocessing systems.
The link ports can operate independently and simultaneously,
with a maximum data throughput of 240 Mbytes/s. Link port
data is packed into 32- or 48-bit words, and can be directly read
by the core processor or DMA-transferred to on-chip memory.
Each link port has its own double-buffered input and output
registers. Clock/acknowledge handshaking controls link port
transfers. Transfers are programmable as either transmit or
receive.
Program Booting
The internal memory of the ADSP-21062 can be booted at
system power-up from either an 8-bit EPROM, a host proces-
sor, or through one of the link ports. Selection of the boot
source is controlled by the
BMS
(Boot Memory Select),
EBOOT (EPROM Boot), and LBOOT (Link/Host Boot) pins.
32-bit and 16-bit host processors can be used for booting.
Off-Chip Memory and Peripherals Interface
The ADSP-21062’s external port provides the processor’s inter-
face to off-chip memory and peripherals. The 4-gigaword off-
chip address space is included in the ADSP-21062’s unified
address space. The separate on-chip buses—for PM addresses,
PM data, DM addresses, DM data, I/O addresses and I/O
data—are multiplexed at the external port to create an external
system bus with a single 32-bit address bus and a single 48-bit
(or 32-bit) data bus.
Addressing of external memory devices is facilitated by on-chip
decoding of high-order address lines to generate memory bank
select signals. Separate control lines are also generated for sim-
plified addressing of page-mode DRAM. The ADSP-21062
provides programmable memory wait states and external
memory acknowledge controls to allow interfacing to DRAM
and peripherals with variable access, hold and disable time
requirements.
Host Processor Interface
The ADSP-21062’s host interface allows easy connection to
standard microprocessor buses, both 16-bit and 32-bit, with
little additional hardware required. Asynchronous transfers at
speeds up to the full clock rate of the processor are supported.
The host interface is accessed through the ADSP-21062’s exter-
nal port and is memory-mapped into the unified address space.
Four channels of DMA are available for the host interface; code
and data transfers are accomplished with low software overhead.
The host processor requests the ADSP-21062’s external bus
with the host bus request (
HBR
), host bus grant (
HBG
), and
ready (REDY) signals. The host can directly read and write the
internal memory of the ADSP-21062, and can access the DMA
channel setup and mailbox registers. Vector interrupt support is
provided for efficient execution of host commands.
DMA Controller
The ADSP-21062’s on-chip DMA controller allows zero-
overhead data transfers without processor intervention. The
DMA controller operates independently and invisibly to the
processor core, allowing DMA operations to occur while the
core is simultaneously executing its program instructions.
DMA transfers can occur between the ADSP-21062’s internal
memory and either external memory, external peripherals or a
host processor. DMA transfers can also occur between the
ADSP-21062’s internal memory and its serial ports or link
ports. DMA transfers between external memory and external
peripheral devices are another option. External bus packing to
16-, 32-, or 48-bit words is performed during DMA transfers.
Ten channels of DMA are available on the ADSP-21062—two
via the link ports, four via the serial ports, and four via the
processor’s external port (for either host processor, other
ADSP-21062s, memory or I/O transfers). Four additional
link port DMA channels are shared with serial port 1 and the
external port. Programs can be downloaded to the ADSP-
21062 using DMA transfers. Asynchronous off-chip peripher-
als can control two DMA channels using DMA Request/
Grant lines (
DMAR1-2
,
DMAG1-2
). Other DMA features
相關PDF資料 |
PDF描述 |
|---|---|
| ADSP-21062LCS-160 | ADSP-2106x SHARC DSP Microcomputer Family |
| ADSP-21062LAB-160 | ADSP-2106x SHARC DSP Microcomputer Family |
| ADSP-21062KB-160 | ADSP-2106x SHARC DSP Microcomputer Family |
| ADSP-21062 | ADSP-2106x SHARC DSP Microcomputer Family |
| ADSP-21062L | Cap-Free, NMOS, 150mA Low Dropout Regulator with Reverse Current Protection |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADSP-21062LKSZ-133 | 功能描述:IC DSP CONTROLLER 32BIT 240MQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - DSP（數字式信號處理器） 系列:SHARC® 標準包裝:2 系列:StarCore 類型:SC140 內核 接口:DSI，以太網，RS-232 時鐘速率:400MHz 非易失內存:外部 芯片上RAM:1.436MB 電壓 - 輸入/輸出:3.30V 電壓 - 核心:1.20V 工作溫度:-40°C ~ 105°C 安裝類型:表面貼裝 封裝/外殼:431-BFBGA，FCBGA 供應商設備封裝:431-FCPBGA（20x20） 包裝:托盤 |
| ADSP-21062LKSZ-160 | 功能描述:IC DSP CONTROLLER 2MBIT 240MQFP RoHS:是 類別:集成電路 (IC) >> 嵌入式 - DSP（數字式信號處理器） 系列:SHARC® 標準包裝:2 系列:StarCore 類型:SC140 內核 接口:DSI，以太網，RS-232 時鐘速率:400MHz 非易失內存:外部 芯片上RAM:1.436MB 電壓 - 輸入/輸出:3.30V 電壓 - 核心:1.20V 工作溫度:-40°C ~ 105°C 安裝類型:表面貼裝 封裝/外殼:431-BFBGA，FCBGA 供應商設備封裝:431-FCPBGA（20x20） 包裝:托盤 |
| ADSP-21065 | 制造商:AD 制造商全稱:Analog Devices 功能描述:DSP Microcomputer |
| ADSP-21065L | 制造商:AD 制造商全稱:Analog Devices 功能描述:DSP Microcomputer |
| ADSP-21065LCCA-240 | 功能描述:IC DSP CTLR 32BIT 196CSPBGA RoHS:否 類別:集成電路 (IC) >> 嵌入式 - DSP（數字式信號處理器） 系列:SHARC® 標準包裝:2 系列:StarCore 類型:SC140 內核 接口:DSI，以太網，RS-232 時鐘速率:400MHz 非易失內存:外部 芯片上RAM:1.436MB 電壓 - 輸入/輸出:3.30V 電壓 - 核心:1.20V 工作溫度:-40°C ~ 105°C 安裝類型:表面貼裝 封裝/外殼:431-BFBGA，FCBGA 供應商設備封裝:431-FCPBGA（20x20） 包裝:托盤 |
發布緊急采購，3分鐘左右您將得到回復。