- 您現在的位置：買賣IC網 > PDF目錄374047 > ADV7191KST (ANALOG DEVICES INC) Video Encoder with Six 10-Bit DACs and Video Encoder with Six DAC Outputs PDF資料下載
參數資料
| 型號： | ADV7191KST |
| 廠商： | ANALOG DEVICES INC |
| 元件分類： | 顏色信號轉換 |
| 英文描述： | Video Encoder with Six 10-Bit DACs and Video Encoder with Six DAC Outputs |
| 中文描述： | COLOR SIGNAL ENCODER, PQFP64 |
| 封裝： | LQFP-64 |
| 文件頁數： | 44/69頁 |
| 文件大小： | 628K |
| 代理商： | ADV7191KST |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁當前第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁第61頁第62頁第63頁第64頁第65頁第66頁第67頁第68頁第69頁
ADV7190/ADV7191
–44–
REV. 0
APPENDIX 1
BOARD DESIGN AND LAYOUT CONSIDERATIONS
The ADV7190/ADV7191 is a highly integrated circuit contain-
ing both precision analog and high-speed digital circuitry. It
has been designed to minimize interference effects on the integ-
rity of the analog circuitry by the high-speed digital circuitry. It
is imperative that these same design and layout techniques be
applied to the system-level design such that high-speed, accurate
performance is achieved. The Recommended Analog Circuit Lay-
out shows the analog interface between the device and monitor.
The layout should be optimized for lowest noise on the ADV7190/
ADV7191 power and ground lines by shielding the digital inputs
and providing good decoupling. The lead length between groups
of V
AA
and GND pins should by minimized in order to mini-
mize inductive ringing.
Ground Planes
The ground plane should encompass all ADV7190/ADV7191
ground pins, voltage reference circuitry, power supply bypass cir-
cuitry for the ADV7190/ADV7191 , the analog output traces, and
all the digital signal traces leading up to the ADV7190/ADV7191.
This should be as substantial as possible to maximize heat spread-
ing and power dissipation on the board.
Power Planes
The ADV7190/ADV7191 and any associated analog circuitry
should have its own power plane, referred to as the analog power
plane (V
AA
). This power plane should be connected to the
regular PCB power plane (V
CC
) at a single point through a
ferrite bead. This bead should be located within three inches
of the ADV7190/ADV7191.
The metallization gap separating device power plane and board
power plane should be as narrow as possible to minimize the
obstruction to the flow of heat from the device into the general
board.
The PCB power plane should provide power to all digital logic
on the PC board, and the analog power plane should provide
power to all ADV7190/ADV7191 power pins and voltage reference
circuitry.
Plane-to-plane noise coupling can be reduced by ensuring that
portions of the regular PCB power and ground planes do not
overlay portions of the analog power plane, unless they can be
arranged so the plane-to-plane noise is common-mode.
Supply Decoupling
For optimum performance, bypass capacitors should be installed
using the shortest leads possible, consistent with reliable operation,
to reduce the lead inductance. Best performance is obtained
with 0.1
μ
F ceramic capacitor decoupling. Each group of V
AA
pins on the ADV7190/ADV7191 must have at least one 0.1
μ
F
decoupling capacitor to GND. These capacitors should be placed
as close as possible to the device.
It is important to note that while the ADV7190/ADV7191
contains circuitry to reject power supply noise, this rejection
decreases with frequency. If a high-frequency switching power
supply is used, the designer should pay close attention to reducing
power supply noise and consider using a three-terminal voltage
regulator for supplying power to the analog power plane.
Digital Signal Interconnect
The digital inputs to the ADV7190/ADV7191 should be isolated
as much as possible from the analog outputs and other analog
circuitry. Also, these input signals should not overlay the ana-
log power plane.
Due to the high clock rates involved, long clock lines to the
ADV7190/ADV7191 should be avoided to reduce noise pickup.
Any active termination resistors for the digital inputs should be
connected to the regular PCB power plane (V
CC
), and not the
analog power plane.
Analog Signal Interconnect
The ADV7190/ADV7191 should be located as close as possible
to the output connectors to minimize noise pickup and reflec-
tions due to impedance mismatch.
The video output signals should overlay the ground plane, and
not the analog power plane, to maximize the high frequency power
supply rejection.
Digital inputs, especially pixel data inputs and clocking signals
should never overlay any of the analog signal circuitry and should
be kept as far away as possible.
For best performance, the outputs should each have a 300
load
resistor connected to GND. These resistors should be placed as
close as possible to the ADV7190/ADV7191 so as to minimize
reflections.
The ADV7190/ADV7191 should have no inputs left floating.
Any inputs that are not required should be tied to ground.
相關PDF資料 |
PDF描述 |
|---|---|
| ADV7190 | Video Encoder with Six 10-Bit DACs and Video Encoder with Six DAC Outputs |
| ADV7192KST | Video Encoder with Six 10-Bit DACs, 54 MHz Oversampling and Progressive Scan Inputs |
| ADV7192 | Video Encoder with Six 10-Bit DACs, 54 MHz Oversampling and Progressive Scan Inputs |
| ADV7194KST | Professional Extended-10⑩ Video Encoder with 54 MHz Oversampling |
| ADV7194 | Professional Extended-10⑩ Video Encoder with 54 MHz Oversampling |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ADV7191KSTZ | 制造商:Analog Devices 功能描述:Video Encoder 6DAC 10-Bit 64-Pin LQFP 制造商:Analog Devices 功能描述:IC VIDEO ENCODER |
| ADV7192 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Video Encoder with Six 10-Bit DACs, 54 MHz Oversampling and Progressive Scan Inputs |
| ADV7192KST | 制造商:AD 制造商全稱:Analog Devices 功能描述:Video Encoder with Six 10-Bit DACs, 54 MHz Oversampling and Progressive Scan Inputs |
| ADV7194 | 制造商:AD 制造商全稱:Analog Devices 功能描述:Professional Extended-10⑩ Video Encoder with 54 MHz Oversampling |
| ADV7194KST | 制造商:Analog Devices 功能描述:Video Encoder 6DAC 10-Bit 80-Pin LQFP 制造商:Rochester Electronics LLC 功能描述:PROFESSIONAL/HDTV NTSC/PAL ENCODER I.C. - Bulk 制造商:Analog Devices 功能描述:IC VIDEO ENCODER |
發布緊急采購，3分鐘左右您將得到回復。