- 您現在的位置：買賣IC網 > PDF目錄379658 > AG1170 (Electronic Theatre Controls, Inc.) +5V / +3.3V Low Power Ringing SLIC PDF資料下載
參數資料
| 型號： | AG1170 |
| 廠商： | Electronic Theatre Controls, Inc. |
| 英文描述： | +5V / +3.3V Low Power Ringing SLIC |
| 中文描述： | 5V的/ 3.3V的低功率振鈴用戶接口 |
| 文件頁數： | 4/15頁 |
| 文件大小： | 362K |
| 代理商： | AG1170 |
V1.9 September 2006
Data Sheet
Ag1170
+5V / +3.3V LOW POWER RINGING SLIC
1.0
Pin Description - DIL Package
Pin #
Name
Description
1
TIP (A)
Tip.
Connects to the subscriber line Tip.
2
RING (B)
Ring.
Connects to the subscriber line Ring.
3
IC
Internal Connection.
Do not connect externally to this pin.
4
PD
Power Down of DC/DC Converter
. A logic 0 powers off the
DC/DC converter. Leave open circuit for free run operation. DO
NOT input logic 1 to this pin.
5
NC
No Connection.
This pin is not connected internally.
6
NC
No Connection.
This pin is not connected internally.
7
RM
Ringing Mode.
Sets bias conditions during ringing. Must be set
to logic 1 during ringing. Logic 0 for other modes.
8
GND
A
Analog Ground.
Normally connected to system ground.
9
+V
A
Analog Supply.
Connect to the +5V or +3.3V supply via an RC
filter, to supply power to the analog circuits.
Line Impedance.
Connect to ZT1 via impedance programming
components.
Line Impedance.
Connect to ZT2 via impedance programming
components.
Balance Impedance.
Connect to VIN via impedance
programming components.
Audio In.
Analog input signal from the Codec (which is output on
Tip and Ring). Connect via a 100nF capacitor.
10
*ZT2
11
*ZT1
12
*ZB
13
V
IN
14
NC
No Connection.
This pin is not connected internally.
15
V
OUT
Audio Out.
Analog output signal (from Tip and Ring) to the
Codec. Connect via a 100nF capacitor.
Forward/Reverse.
A logic 0 will reverse the Tip and Ring voltage
polarities. F/R is toggled to produce the ringing output.
16
F/R
17
SHK
Switch Hook.
Indicates an off-hook condition when at logic 1.
18
GND
PWR
DC/DC Ground.
Ground input for the DC/DC converter.
19
+V
PWR
DC/DC Supply.
+5V or +3.3V input for the DC/DC converter.
20
GND
PWR
DC/DC Ground.
Ground input for the DC/DC converter.
21
+V
PWR
DC/DC Supply.
+5V or +3.3V input for the DC/DC converter.
* Only used for the Ag1170P device. Do not connect for Ag1170 as impedance is programmed to 600R internally
Silver Telecom 2006
4
相關PDF資料 |
PDF描述 |
|---|---|
| AG1170-D3 | +5V / +3.3V Low Power Ringing SLIC |
| AG1170-D5 | +5V / +3.3V Low Power Ringing SLIC |
| AG1170P-D3 | +5V / +3.3V Low Power Ringing SLIC |
| AG1170P-D5 | +5V / +3.3V Low Power Ringing SLIC |
| AG1170P-S3 | +5V / +3.3V Low Power Ringing SLIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AG1170-D3 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:+5V / +3.3V Low Power Ringing SLIC |
| AG1170-D5 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:+5V / +3.3V Low Power Ringing SLIC |
| AG1170P-D3 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:+5V / +3.3V Low Power Ringing SLIC |
| AG1170P-D5 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:+5V / +3.3V Low Power Ringing SLIC |
| AG1170P-S3 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:+5V / +3.3V Low Power Ringing SLIC |
發布緊急采購，3分鐘左右您將得到回復。