- 您現在的位置：買賣IC網 > PDF目錄48364 > AH1618DS (ALLIED COMPONENTS INTERNATIONAL) DATACOM TRANSFORMER FOR 10/100 BASE-T APPLICATION(S) PDF資料下載
參數資料
| 型號： | AH1618DS |
| 廠商： | ALLIED COMPONENTS INTERNATIONAL |
| 元件分類： | 脈沖/數據通信變壓器 |
| 英文描述： | DATACOM TRANSFORMER FOR 10/100 BASE-T APPLICATION(S) |
| 封裝： | ROHS COMPLIANT |
| 文件頁數： | 5/6頁 |
| 文件大?。?/td> | 2463K |
| 代理商： | AH1618DS |
5
2003 Semtech Corp.
www.semtech.com
PROTECTION PRODUCTS
SM05 through SM36
Applications Information
Device Schematic & Pin Configuration
Device Connection Options
The SM series is designed to protect one bidirectional
or two unidirectional data or I/O lines operating at 5 to
36 volts. Connection options are as follows:
Bidirectional: Pin 1 is connected to the data line
and pin 2 is connected to ground (Since the device
is symmetrical, these connections may be re-
versed). For best results, the ground connection
should be made directly to a ground plane on the
board. The path length should be kept as short as
possible to minimize parasitic inductance. Pin 3 is
not connected.
Unidirectional: Data lines are connected to pin 1
and pin 2. Pin 3 is connected to ground. For best
results, this pin should be connected directly to a
ground plane on the board. The path length should
be kept as short as possible to minimize parasitic
inductance.
Circuit Board Layout Recommendations for Suppres-
sion of ESD.
Good circuit board layout is critical for the suppression
of fast rise-time transients such as ESD. The following
guidelines are recommended (Refer to application note
SI99-01 for more detailed information):
Place the TVS near the input terminals or connec-
tors to restrict transient coupling.
Minimize the path length between the TVS and the
protected line.
Minimize all conductive loops including power and
ground loops.
The ESD transient return path to ground should be
kept as short as possible.
Never run critical signals near board edges.
Use ground planes whenever possible.
RS-232 Transceiver Protection Example
相關PDF資料 |
PDF描述 |
|---|---|
| AH1619DI | DATACOM TRANSFORMER FOR 10/100 BASE-T APPLICATION(S) |
| AH1619DS | DATACOM TRANSFORMER FOR 10/100 BASE-T APPLICATION(S) |
| AH1620DI | DATACOM TRANSFORMER FOR 10/100 BASE-T APPLICATION(S) |
| AH1620DS | DATACOM TRANSFORMER FOR 10/100 BASE-T APPLICATION(S) |
| AH1621DI | DATACOM TRANSFORMER FOR 10/100 BASE-T APPLICATION(S) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AH16-2 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Analog IC |
| AH1627CI | 制造商:ALLI 功能描述:SM MAGNETIC 10/100 BASE T SINGLE PORT LAN FILTER MODULE LL: 0.5uH @ 100KHz Cw/w 25P |
| AH164-P2B11 | 制造商:Fuji Electric 功能描述: |
| AH164-P3B22 | 制造商:Fuji Electric 功能描述: |
| AH164-SLG11E3 | 制造商:Fuji Electric 功能描述:Switch Push Button N.O./N.C. DPST Flush Square Button Momentary Contact Quick Connect/Solder Panel Mount |
發布緊急采購，3分鐘左右您將得到回復。