- 您現在的位置：買賣IC網 > PDF目錄376487 > AN1156 (Maxim Integrated Products, Inc.) Low-Cost AC Supply PDF資料下載
參數資料
| 型號： | AN1156 |
| 廠商： | Maxim Integrated Products, Inc. |
| 英文描述： | Low-Cost AC Supply |
| 中文描述： | 低成本交流電源 |
| 文件頁數： | 1/3頁 |
| 文件大小： | 28K |
| 代理商： | AN1156 |
Low-Cost AC Supply
The following application note discusses a low-cost solution to implement a
3V, 3.3V or 5V logic supply from AC power. It uses the MAX6330 shunt
regulator which can supply up to 50mA as well as offering a reset output
(power-on reset, POR).
One often needs a low-cost logic supply for powering the MCU and related control circuitry in
"white goods" products such as industrial controllers and sensors. Those applications usually
include 24VAC, 115VAC, or higher levels of AC power for conversion to 3.3V or 5.0V. (The
following circuit suits applications that include 24VAC. With proper safety precautions, it can also
be applied to double-insulated white goods and other products that require a logic supply for
control or monitoring functions.)
The simplest approach for generating low-current logic levels from an AC source is to apply the
rectified and filtered AC input to a high-input-voltage linear regulator. But, power dissipation in
the regulator can be considerable, even for modest load currents. A standard shunt regulator
also dissipates notable power in the limiting resistor. A switching regulator minimizes power
dissipation, but that type may not be practical for cost-sensitive designs.
As an alternative, consider an AC-coupled approach to reduce the power dissipation in linear or
shunt-regulator designs. To transfer energy to the regulator with negligible power loss, use a
coupling capacitor in conjunction with an IC containing a shunt regulator and power-on reset
(Figure 1). Available with 50mA maximum output-current capability in 3.0V, 3.3V, and 5.0V
shunt-voltage versions, IC1 also includes a power-on-reset (POR) function. Because IC1 is an
active shunt (vs. a passive zener diode) one must rectify the AC voltage before applying it.
Typically, a capacitor follows the rectifier to hold the charge during off cycles. As shown, a
simple half wave rectifier is used to save cost.
相關PDF資料 |
PDF描述 |
|---|---|
| AN12941A | The AN12941A is an amplifier IC for stereo speakers which can output 1 W by 8 Ohm or 2 W by 4 Ohm |
| AN12942B | Audio signal processing IC for notebook PC |
| AN12943A | Audio signal processing IC for notebook PC |
| AN12974A | Stereo power amplifier with built-in AGC circuitry and SPATIALIZER |
| AN15525A | Silicon Monolithic Bipolar IC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| AN-1161 | 制造商:AD 制造商全稱:Analog Devices 功能描述:EMC-Compliant RS-485 Communication Networks |
| AN116905 | 制造商: 功能描述: 制造商:undefined 功能描述: |
| AN116932 | 制造商:AN# - MILITARY 功能描述: |
| AN-1177 | 制造商:AD 制造商全稱:Analog Devices 功能描述:LVDS and M-LVDS Circuit Implementation Guide |
| AN-118 | 制造商:IXYS 制造商全稱:IXYS Corporation 功能描述:Detecting Line Polarity Reversal Associated with BT Calling Line Identification Protocol |
發布緊急采購，3分鐘左右您將得到回復。