
ZETTLER
electronics GmbH
Puchheim,
D-82178
Junkersstrasse 3,
Fax +49 89 800 97 200 www.ZETTLERelectronics.com
office@ZETTLERelectronics.com
0
97
800
89
+49
Tel.
Germany
2003-06-30
AZ830 4 POLE
4 POLE POLARIZED
MINIATURE DIP RELAY
FEATURES
Single side stable and two coil bistable versions
High sensitivity, 90 mW pickup
Low profile DIP package
DC coils to 48 VDC
Life expectancy to 100 million operations
Meets FCC Part 68.302 1500 V lightning surge
Meets FCC Part 68.304 1000 V dielectric
Epoxy sealed
UL file E43203; CSA file 73363
CONT ACT S
Arrangement
4PDT (4 Form C)
Bifurcated crossbar contacts
Ratings
Resistive load:
Max. switched power: 60 W or 60 VA
Max. switched current: 2 A
Max. switched voltage: 220 VDC or 250 VAC
Rated Load
UL
1 A at
0.5 A at 120 VAC
30 VDC
Material
Silver palladium, gold clad
Resistance
< 50 milliohms initially
GENERAL DAT A
Life Expectancy
Minimum operations
1 x 10
8
5 x 10
5
at 2 A, 30 VDC
2 x 10
5
at 0.5 A, 120 VAC
Mechanical
Electrical
Operate Time (typical)
3 ms at nominal coil voltage
Release Time (typical)
2 ms at nominal coil voltage
(with no coil suppression)
Capacitance
Contact to contact: 1.0 pF
Contact set to contact: 1.7 pF
Contact to coil: 2.0 pF
Bounce (typical)
At 10 mA contact current
0.3 ms at operate
0.3 ms at release
Dielectric Strength
(at sea level)
1500 Vrms contact to coil
1500 Vrms between contact sets
1000 Vrms across contacts
250 Vrms coil to coil (dual coil)
1500 Vrms surge contact to coil
1500 Vrms surge contact set to contact set
Meets FCC Part 68.302 lightning surge
Meets FCC Part 68.304 V dielectric
Insulation Resistance
1000 megohms min. at 20°C, 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
At nominal coil voltage
Standard: -40°C (-40°F) to 70°C (158°F)
Sensitive: -40°C (-40°F) to 80°C (176°F)
Both: -40°C (-40°F) to 110°C (230°F)
Storage
Vibration
0.062" (1.5 mm) DA at 10–55 Hz
Shock
30 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
260°C (500°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
6.5 grams
COIL (Polarized)
Power
At Pickup Voltage
(typical)
Standard coil: 200 mW, single side stable
180 mW, bistable (latching) two coil
Sensitive coil: 100 mW, single side stable
90 mW, bistable (latching) two coil
1.27 W at 20°C (68°F) ambient
0.99 W at 40°C (104°F) ambient
Standard: 34°C (61°F) at nominal coil voltage
Sensitive: 17°C (31°F) at nominal coil voltage
Max. Continuous
Dissipation
Temperature Rise
Temperature
Max. 110°C (230°F)
NOT ES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Relay has fixed coil polarity.
4. Relay adjustment may be affected if undue pressure is exerted
on relay case.
5. For complete isolation between the relay’s magnetic fields, it is
recommended that a .197" (5.0 mm) space be provided between
adjacent relays.
6. Specifications subject to change without notice.