
CONT ACT S
Arrangement
SPST (1 Form A)
SPDT (1 Form C)
Ratings
Form A and C
Max. switched power: 210 W or 2770 VA
Max. switched current: 15 A AC, 7 A DC
Max. switched voltage: 30 VDC or 300 VAC
UL/CUR
Ratings
1 Form A
15 A at 125 VAC, general use
10A at 277 VAC, general use, 100,000 cycles
TV - 5 120 VAC
1 Form C
10 A at 277 VAC, general use, 100,000 cycles
Material
AgSnO
2
Resistance
< 100 milliohms initally
(24 V, 1 A method)
ZETTLER
electronics
Logistic Design (UK) Limited. Unit 3, Eagle Centre Way, Luton LU4 9US www.zettlerrelay.com sales@zettlerrelay.com
Telephone +44 (0) 1582 599 600 Fax +44 (0) 1582 599 700
2000-01-21
AZ943
GENERAL DAT A
Life Expectancy
Mechanical
Electrical
1 x 10
6
1 x 10
5
at rated load
Operate Time
10 ms max.
Release Time
5 ms max.
(with no coil suppression)
Dielectric Strength
(at sea level for 1 min.)
1000 Vrms across contacts
1500 Vrms contact to coil
Insulation Resistance
100 megohms min. at 500 VDC,
50% RH
Dropout
Greater than 10% of nominal coil voltage
Ambient Temperature
Operating
Storage
At nominal coil voltage
-40°C(-40°F) to 95°C(203°F)
-40°C(-40°F) to 130°C(266°F)
Vibration
0.062" DA at 10–55 Hz
Shock
10 g
Enclosure
P.B.T. polyester
Terminals
Tinned copper alloy, P.C.
Max. Solder Temp.
270°C (518°F)
Max. Solder Time
5 seconds
Max. Solvent Temp.
80°C (176°F)
Max. Immersion Time
30 seconds
Weight
10 g
COIL
Power
At Pickup Voltage
Max Continuous
Dissipation
203 mW
1.0 W at 20°C (68°F)
Temperature Rise
(at nominal coil voltage)
27°C (49°F)
Temperature
Max. 130°C (266°F)
15 AMP
MINIATURE
PC BOARD RELAY
FEATURES
High performance
Low seated height
Flux tight and sealed versions available
UL, CUR file E43203
Class B insulation (130°C) standard
NOT ES
1. All values at 20°C (68°F).
2. Relay may pull in with less than “Must Operate” value.
3. Unsealed relays should not be dip cleaned.
4. Specifications subject to change without notice.