- 您現在的位置：買賣IC網 > PDF目錄369494 > BRR1A16NB Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A PDF資料下載
參數資料
| 型號： | BRR1A16NB |
| 英文描述： | Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A |
| 中文描述： | 四路差分接收器BRF1A，BRF2A，BRS2B，BRR1A和BRT1A |
| 文件頁數： | 1/12頁 |
| 文件大小： | 236K |
| 代理商： | BRR1A16NB |
Data Sheet
April 2001
Quad Differential Receivers
BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A
Features
I
Pin equivalent to the general-trade 26LS32 device,
with improved speed, reduced power consumption,
and significantly lower levels of EMI
I
High input impedance approximately 8 k
I
Four line receivers per package
I
400 Mbits/s maximum data rate when used with
Agere Systems Inc. data transmission drivers
I
Meets enhanced small device interface (ESDI)
standards
I
4.0 ns maximum propagation delay
I
<0.20 V input sensitivity
I
1.2 V to
+
7.2 V common-mode range
I
40
°
C to
+
125
°
C ambient operating temperature
range (wider than the 41 Series)
I
Single 5.0 V
±
10% supply
I
Output defaults to logic 1 when inputs are left
open*
I
Available in four package types
I
Lower power requirement than the 41 Series
Description
These quad differential receivers accept digital data
over balanced transmission lines. They translate
differential input logic levels to TTL output logic
levels. All devices in this family have four receivers
with a common enable control. These receivers are
pin equivalent to the general-trade 26LS32, but offer
increased speed and decreased power consumption.
They replace the Agere 41 Series receivers.
* This feature is available on BRF1A and BRF2A.
The BRF1A device is the generic receiver in this
family and requires the user to supply external
resistors on the circuit board for impedance
matching.
The BRF2A is identical to the BRF1A, but has an
electrostatic discharge (ESD) protection circuit
added to significantly improve the ESD human-body
model (HBM) characteristics on the differential input
terminals.
The BRS2B is identical to the BRF2A, but has a
preferred state feature that places the output in the
high state when the inputs are open, shorted to
ground, or shorted to the power supply.
The BRR1A is equivalent to the BRF1A, but has a
110
resistor connected across the differential
inputs. This eliminates the need for an external
resistor when terminating a 100
impedance line.
This device is designed to work with the DP1A or
PNPA in point-to-point applications.
The BRT1A is equivalent to the BRF1A; however, it
is provided with a Y-type resistor network across the
differential inputs and terminated to ground. The
Y-type termination provides the best EMI results.
This device is not recommended for applications
where the differences in ground voltage between the
driver and the receiver exceed 1 V. This device is
designed to work with the DG1A or PNGA in point-to-
point applications.
The powerdown loading characteristics of the
receiver input circuit are approximately 8 k
relative
to the power supplies; hence, they will not load the
transmission line when the circuit is powered down.
For those circuits with termination resistors, the line
will remain impedance matched when the circuit is
powered down.
The packaging options that are available for these
quad differential line drivers include a 16-pin DIP; a
16-pin, J-lead SOJ; a 16-pin, gull-wing small-outline
integrated circuit (SOIC); and a 16-pin, narrow-body,
gull-wing SOIC.
相關PDF資料 |
PDF描述 |
|---|---|
| BRR1A16P | Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A |
| BRS2B16E | Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A |
| BRS2B16E-TR | Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A |
| BRS2B16G | Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A |
| BRS2B16G-TR | INDUCTOR TORD HI AMP 470UH VERT |
相關代理商/技術參數 |
參數描述 |
|---|---|
| BRR1A16NB-TR | 制造商:AGERE 制造商全稱:AGERE 功能描述:Quad Differential Receivers BRF1A, BRF2A, BRS2B, BRR1A, and BRT1A |
| BRR1A16P | 制造商:Rochester Electronics LLC 功能描述:- Bulk |
| BRR215 | 制造商:Eaton Corporation 功能描述:Type BR Latching Remote Breaker 15A/2 Pole 120/240V 10K |
| BRR25N-02S | 制造商:Fuji Electric 功能描述: |
| BRRL | 制造商:Eaton Corporation 功能描述:Gray Cover Replacement Latch For BR Loadcenter |
發布緊急采購，3分鐘左右您將得到回復。