- 您現在的位置：買賣IC網 > Datasheet目錄52 > CB-ACC-36 (ConnectBlue)ANTENNA 1/2WV 2.4GHZ 10CM RPSMA Datasheet資料下載
參數資料
| 型號： | CB-ACC-36 |
| 廠商： | ConnectBlue |
| 文件頁數： | 36/58頁 |
| 文件大小： | 510K |
| 描述： | ANTENNA 1/2WV 2.4GHZ 10CM RPSMA |
| 標準包裝： | 1 |
| 天線類型： | 鞭狀：1/2 波，偶極 |
| 頻帶數目： | 1 |
| 頻率： | 2.4GHz |
| 增益： | 2.5dBi |
| 端子： | RP-SMA |
| 安裝類型： | 連接器 |
| 高度（最大）： | 3.93"（100mm） |
| 包裝： | 散裝 |
| 產品目錄頁面： | 558 (CN2011-ZH PDF) |
| 其它名稱： | 809-1001 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁當前第36頁第37頁第38頁第39頁第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁
Version 1.17 2011-09
36
5.3 Using Press-Fit Nuts for Mounting the Module
A press-fit nut is pressed into the PCB from the bottom side with a special press tool. M2
sized press-fit nuts are suitable for the modules (see Figure 7 and Figure 8) and are manu-
factured by PEM Fastening Systems (www.pemnet.com), part no KFS2-M2 (see Figure 9).
Be careful with the distance between the nuts regarding alignment, see section 5.1.2.
Figure 9: KFS2-M2 press-fit nut.
Spacer-pipes are recommended to use between the PCBs when press-fit nuts are used.
5.4 Using the J6 PCB solder pads on the edge
5.4.1 Host PCB
The host PCB footprint should not contain any traces or vias under the module except the
pads interfacing the J6 pads to avoid contact with traces/vias on the module. The host pads
which are soldered to the J6 pads should reach 0.5-1.0mm under the PCB and some mm
outside the module. No other pads than the J6 should be soldered to the host PCB. See sec-
tion 2.1.1 for more info about the J6 pads.
5.4.2 Mounting process
" We strongly recommend the modules not being soldered more than 1 time after
shipping from connectBlue and that the modules are mounted just before the host
product is being soldered the last time. Although, connectBlue devices will withstand
up to two reflows to an absolute maximum temperature of 250癈.
" The PCB in our modules is made of FR4-type with Chemical Gold Pads.
" The modules are produced in a lead-free process with a lead-free soldering paste.
" It is recommended that the customers make their own electrical, climate, stress and
vibration tests on the final assembled product to secure that the manufacturing pro-
cess hasn't damaged or affected the Bluetooth module in any way.
" The modules can be delivered on trays or individually packed in ESD bags with label
on each module. The label will not withstand the heat of soldering and should be
removed before processed. The modules delivered in trays will not have individual
label (only batch labels on the tray).
" Modules delivered on trays are classed with MSL-Class 3.
" The device recommended maximum reflow temperature is 245癈 for 10 sec.
" The device absolute maximum reflow temperature is 250癈 for 3 sec.
相關PDF資料 |
PDF描述 |
|---|---|
| CC-ANT923842 | ANTENNA 916MHZ 1/2WAVE PCB MT |
| CGGP.1600.25.4.A.02 | GPS GLONASS PATCH 1575.42MHZ |
| CGGP.18.4.C.02 | RF ANTENNA |
| CGGP.35.3.A.02 | RF ANTENNA |
| CGIP.25.4.A.02 | RF ANTENNA |
相關代理商/技術參數 |
參數描述 |
|---|---|
| CB-ACC-38 | 功能描述:ANTENNA CABLE 12CM U.FL/RPSMA RoHS:是 類別:電纜組件 >> 同軸，RF 系列:- 標準包裝:1 系列:* |
| CB-ACC-41 | 制造商:connectBlue 功能描述:KIT ACCY BLUETOOTH/WLAN USB SPA |
| CB-ACC-53 | 制造商:connectBlue 功能描述:ANTENNA DUAL-BAND RPSMA |
| CB-ACC-54 | 制造商:connectBlue 功能描述:RF ANT DUAL BAND STUB SMA |
| CB-ACC-55 | 制造商:connectBlue 功能描述:RF ANT DUAL BAND PCB U.FL |
發布緊急采購，3分鐘左右您將得到回復。