- 您現在的位置：買賣IC網 > PDF目錄257666 > CD-700-LAF-HFB-28.704 (VECTRON INTERNATIONAL) PHASE LOCKED LOOP, CQCC16 PDF資料下載
參數資料
| 型號： | CD-700-LAF-HFB-28.704 |
| 廠商： | VECTRON INTERNATIONAL |
| 元件分類： | XO, clock |
| 英文描述： | PHASE LOCKED LOOP, CQCC16 |
| 封裝： | 5 X 7.50 MM, 2 MM HEIGHT, HERMETIC SEALED, CERAMIC, SMD-16 |
| 文件頁數： | 14/14頁 |
| 文件大小： | 123K |
| 代理商： | CD-700-LAF-HFB-28.704 |
CD-700, VCXO Based PLL
Vectron International, 267 Lowell Rd, Hudson NH 03051-4916
Tel: 1-88-VECTRON-1
Web: www.vectron.com
Page 9 of 14
Rev : 06Apr08
Layout Considerations
To achieve stable, low noise performance good analog layout techniques should be incorporated and a
partial list is shown below.
The CD-700 should be treated more like an analog device and the power supply must be well decoupled
with a good quality RF 0.01 uF capacitor in parallel with a 0.1 uF capacitor, located as close to pin 14 as
possible and connected to ground. In some cases, a
Π filter such as a large capacitor (10uF) to ground, a
series ferrite bead or inductor with 0.01 uF and 100 pF capacitor to ground to decouple the device
supply.
The traces for the OUT1, OUT2, RCLK and RDATA ouputs should be kept as short as possible. It is
common practice to use a series resistor ( 50 to 100 ohms ) in order to reduce reflections if these traces
are more than a couple of inches long. Also OUT1, OUT2, RCLK and RDATA should not be routed
directly underneath the device.
The op-amp loop filter components should be kept as close to the device as possible and the feedback
capacitor should be located close to the op-amp input terminal. The loop filter capacitor(s) should be low
leakage (polarized capacitors are allowed).
Unused outputs should be left floating and it is not required to load or terminate them (such as an ECL or
PECL output). Loading unused outputs will only increase current consumption.
Application Circuits
Figure 8. 8kHz to 44.736 MHz Frequency Translation
44.736 MHz
8 kHz (pin 5)
pin 1
pin 15
pin 16
pin 2
pin 3
10k 0.01uF 10k 2.2uF 330k 20k
0.1uF
10k , 2.2uF
10k
÷ 2796
16kHz (pin 6)
CD-700
pin 13
VCXO
÷
3.3 V
相關PDF資料 |
PDF描述 |
|---|---|
| CAT825ZSDI-G | 1-CHANNEL POWER SUPPLY MANAGEMENT CKT, PDSO5 |
| CAT1024UE-30TE13 | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8 |
| CAT1024ZI-30TE13 | 1-CHANNEL POWER SUPPLY SUPPORT CKT, PDSO8 |
| CK1001-9ERV0B2 | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
| CK1301-9ERD8B2 | 1-OUTPUT 150 W DC-DC REG PWR SUPPLY MODULE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| CD701-024 | 制造商:Curtis Instruments 功能描述:HOUR COUNTER MODULE 制造商:Curtis Instruments 功能描述:HOUR COUNTER MODULE; Supply Voltage Range:12V DC to 48V DC; Time Range:0h to 99999.9h; Reset Time:0.5s; Digit Height:7mm; External Depth:5mm; External Length / Height:19mm; External Width:33mm; Operating Temperature Max:85C; ;RoHS Compliant: NA 制造商:Curtis Instruments 功能描述:HOUR COUNTER MODULE; Supply Voltage Range:12V DC to 48V DC; Time Min:0s; Time Max:99999.9h; Reset Time:0.5s; Digit Height:7mm; External Depth:5mm; External Length / Height:19mm; External Width:33mm; Operating Temperature Max:85C; ;RoHS Compliant: NA |
| CD70-14AFTPM-Q | 制造商:Panduit Corp 功能描述: |
| CD-70-14-PY | 制造商:Thomas & Betts 功能描述: |
| CD70-14-Q | 制造商:Panduit Corp 功能描述:S-PC |
| CD70-14-QY | 功能描述:手工工具 Copper Mech Lug, 2 Hole, Straight Floati RoHS:否 制造商:Molex 產品:Extraction Tools 類型: 描述/功能:Extraction tool |
發布緊急采購，3分鐘左右您將得到回復。