
2004 California Micro Devices Corp. All rights reserved.
05/13/04
430 N. McCarthy Blvd., Milpitas, CA 95035-5112
▲
Tel: 408.263.3214
▲
Fax: 408.263.7846
▲
www.calmicro.com
1
CM1415
3 Channel Headset EMI Filter with ESD Protection
Features
Functionally and pin compatible with California
Micro Device’s CSPEMI205
Optiguard
coated for improved reliability at
assembly
Three channels of EMI filtering, two for earpiece
speakers and one for a microphone
Pi-style EMI filters in a capacitor-resistor-capacitor
(C-R-C) network
Greater than 30dB relative attenuation in the 800-
2700MHz range
+
8kV ESD protection on each channel
(IEC 61000-4-2 Level 4, contact discharge)
+
15kV ESD protection on each channel (HBM)
8-bump, 1.41mm X 1.45mm footprint
Chip Scale Package (CSP)
Chip Scale Package features extremely low para-
sitic inductance for optimum filter performance
Lead-free version available
Applications
EMI filtering and ESD protection for headset micro-
phone and speaker
Cellular / Mobile Phones
Notebooks and Personal Computers
Handheld PCs / PDAs / Tablets
Wireless Handsets
Digital Camcorders
Product Description
The CM1415 is a low-pass filter array integrating three
pi-style filters (C-R-C) that reduce EMI/RFI emissions
while at the same time providing ESD protection. This
device is custom-designed to interface with the head-
set port on a cellular telephone, and contains two dif-
ferent filter values. Each high quality filter provides
more than 30dB attenuation in the 800-2700 MHz
range. These pi-style filters support bidirectional filter-
ing, controlling EMI both to and from the microphone
and speaker elements. They also support bipolar sig-
nals, enabling audio signals to pass through without
distortion.
In addition, the CM1415 provides a very high level of
protection for sensitive electronic components that may
be subject to electrostatic discharge (ESD). The input
pins are designed and characterized to safely dissipate
ESD strikes of
+
8kV, the maximum requirement of the
IEC 61000-4-2 international standard. Using the MIL-
STD-883 (Method 3015) specification for Human Body
Model (HBM) ESD, the device provides protection for
contact discharges to greater than
+
15kV.
The CM1415 is particularly well suited for portable
electronics (e.g., cellular telephones, PDAs, notebook
computers) because of its small package format and
low weight.
The CM1415 incorporates Optiguard
coating which
results in improved reliability at assembly. The CM1415
is available in a space-saving, low-profile Chip Scale
Package with optional lead-free finishing.
Electrical Schematic
10
1
1
Earpiece 1
Input
A3
B4
C1
C3
B2
GND
GND
A1
10
Earpiece 2
Input
Earpiece 1
Output
Earpiece 2
Output
1
1
68
4
4
Microphone
C5
A5
Input
Microphone
Output