
3236 Scott Boulevard
Santa Clara, California 95054
Phone: (408) 986-5060
Fax: (408) 986-5095
CMM6004-SC
Features
0.25 to 3.0 GHz Frequency Range
41 dBm Output IP3
2.1 dB Noise Figure
14.5 dB Gain
23.5 dBm P1dB
SOT-89 SMT Package
Single Power Supply
+3V to +5V Voltage Rail
Description
The CMM6004-SC is a high dynamic range amplifier
designed for applications operating within the 0.25 to 3.0 GHz
frequency range. It is an ideal solution for transmit and receive
functions where high linearity is required.
The amplifier has the flexibility of being optimized
for a number of wireless applications. The combination of low
NF and high IP3 at the same bias point make it an ideal trans-
mit or receive solution when used in applications including
cellular and PCS (personal communications service) operating
from 0.8 to 2.2 GHz; MMDS (multichannel multipoint distrib-
ution systems) operating from 2.2 to 2.7 GHz; and WLAN
(wireless LAN) operating at 2.4 GHz.
The CMM6004-SC is packaged in a low-cost, space
efficient, surface mount SOT-89 package which provides
excellent electrical stability and low thermal resistance. All
devices are 100% RF and DC tested.
0.25 to 3.0 GHz
High Dynamic Range
Amplifier
Advanced Product Information
April 2003
(1 of 7)
Functional Block Diagram
Absolute Maximum Ratings
Parameter
Supply Voltage
RF Input Power
Rating
+6.0 V
+10 dBm
Parameter
Storage Temperature
Junction Temperature
Rating
-55°C to +125°C
150°C
Parameter
Operating Temperature
Thermal Resistance
Rating
-40°C to +85°C
89°C/W
Parameter
Frequency Range
Gain
Input Return Loss
Output IP3
Noise Figure
Output P1dB
Operating Current Range
Supply Voltage
Condition
Min
0.25
13.5
Typ
Max
3.0
Units
GHz
dB
dB
dBm
dB
dBm
mA
V
Externally matched
Externally matched
14.5
-10
+41
2.1
23
150
5.0
+38
1.6
120
180
Electrical Characteristics
Unless otherwise specified, the following specifications are guaranteed at room temperature
in a Celeritek test fixture.
Notes:
1. T = 25°C, Vdd = 5.0, Frequency = 800 MHz, 50 Ohm system
2. OIP3 measured with two tones at output power of 5 dBm/tone separated by 10 MHz.
Operation of this device above any of these parameters may cause damage.
Parameter
Frequency Range
Gain
Input Return Loss
Output Return Loss
Output IP3
Output P1dB
Noise Figure
Typical
1900
14.5
-15
-10
Units
MHz
dB
dB
dB
dBm
dBm
dB
900
16.5
-18
-14
+41.5 +41.0
23.8
1.8
2400
13.6
-15
-12
+41.0
23.0
2.3
23.5
2.2
Typical Parameters
Notes:
1. Typical values reflect performance in recommended application circuit.
Input
Ground Output
Bias
Ground
1
2
3
4