
COP888CF
8-Bit CMOS ROM Based Microcontrollers with 4k
Memory and A/D Converter
General Description
The COP888CF ROM based microcontrollers are highly in-
tegrated COP8
Feature core devices with 4k memory and
advanced features including anA/D Converter. These single-
chip CMOS devices are suited for applications requiring a
full featured controller with an 8-bit A/D converter. Pin and
software compatible (different V
range) 16k/32k OTP
(One
Time
Programmable)
(COP87L88CF Family) for pre-production, and for use with a
range of COP8 software and hardware development tools.
versions
are
available
Family features include an 8-bit memory mapped architec-
ture, 10 MHz CKI with 1 μs instruction cycle, two multi-
function 16-bit timer/counters, MICROWIRE/PLUS
serial
I/O, one 8-bit/8-channel A/D converter with prescaler and
both differential and single ended modes, crystal or R/C os-
cillator, two power saving HALT/IDLE modes, idle timer,
MIWU, high current outputs, software selectable I/O options,
WATCHDOG
timer and Clock Monitor, 2.5V to 6.0V opera-
tion and 28/40/44 pin packages.
Devices included in this datasheet are:
Device
COP884CF
COP984CF
COP888CF
COP988CF
Memory
4k bytes ROM
4k bytes ROM
4k bytes ROM
4k bytes ROM
RAM
128 bytes
128 bytes
128 bytes
128 bytes
I/O Pins
22
22
34/38
34/38
Packages
28 DIP/SOIC
28 DIP/SOIC
40 DIP, 44 PLCC
40 DIP, 44 PLCC
Temperature
-40 to +85C
-0 to +70C
-40 to +85C
-0 to +70C
Key Features
n
A/D converter (8-bit, 8-channel, with prescaler and both
differential and single ended modes)
n
Two 16-bit timers, each with two 16-bit registers
supporting:
— Processor Independent PWM mode
— External Event counter mode
— Input Capture mode
n
4 kbytes of on-chip ROM
n
128 bytes of on-chip RAM
Additional Peripheral Features
n
Idle Timer
n
Multi-Input Wake Up (MIWU) with optional interrupts (8)
n
WATCHDOG and Clock Monitor logic
n
MICROWIRE/PLUS serial I/O
I/O Features
n
Memory mapped I/O
n
Software selectable I/O options (TRI-STATE
Output,
Push-Pull Output, Weak Pull-Up Input, High Impedance
Input)
n
High current outputs
n
Packages:
— 44 PLCC with 38 I/O pins
— 40 DIP with 34 I/O pins
— 28 DIP/SO with 22 I/O pins
n
Schmitt trigger inputs on Port G
CPU/Instruction Set Feature
n
1 μs instruction cycle time
n
Ten multi-source vectored interrupts servicing
— External interrupt with selectable edge
— Idle Timer T0
— Two Timers (Each with 2 interrupts)
— MICROWIRE/PLUS
— Multi-Input Wake Up
— Software Trap
— Default VIS (default interrupt)
n
Versatile and easy to use instruction set
n
8-bit Stack Pointer (SP)— stack in RAM
n
Two 8-bit Register Indirect Data Memory Pointers (B, X)
Fully Static CMOS
n
Low current drain (typically
<
1 μA)
n
Single supply operation: 2.5V to 6.0V
n
Temperature ranges: 0C to +70C, and
40C to +85C
Development Support
n
Emulation and OTP devices
n
Real time emulation and full program debug offered by
MetaLink Development System
COP8
is a trademark of National Semiconductor Corporation.
MICROWIRE
is a trademark of National Semiconductor Corporation.
MICROWIRE/PLUS
is a trademark of National Semiconductor Corporation.
TRI-STATE
is a registered trademark of National Semiconductor Corporation.
WATCHDOG
is a trademark of National Semiconductor Corporation.
iceMASTER
is a trademark of MetaLink Corporation.
September 1999
C
1999 National Semiconductor Corporation
DS009425
www.national.com