- 您現在的位置：買賣IC網 > PDF目錄51317 > CPFI-UG88-11 CABLE TERMINATED, MALE, BNC CONNECTOR, CRIMP, PLUG PDF資料下載
參數資料
| 型號： | CPFI-UG88-11 |
| 元件分類： | RF連接器 |
| 英文描述： | CABLE TERMINATED, MALE, BNC CONNECTOR, CRIMP, PLUG |
| 文件頁數： | 1/2頁 |
| 文件大小： | 97K |
| 代理商： | CPFI-UG88-11 |
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
Cambridge Products, P.O. Box 1732, Waseca, MN 56093-0832 1-800-243.8814 Fax: 507-833-6287 www.cambridgeproducts.com
BNC 50 Ohm Straight Twist-On Plug -
Field Installable - 1 Piece
1. Identify connector parts. (1 piece)
2. Trim cable as shown. Taking care not to nick the center conductor or outer braid.
3. Use the fingernail to rotate the outer braids clockwise such that 1/32" of the insulation is bared. Then in the same direction rub the
stray braids flat. (Stray or loose braids can cause shorts.)
4. Gently insert the center conductor down the back end of the connector, feeling it into the guide hole. (If the center conductor is not
in place, approximately 1/8” of the center conductor - the part closest to the dielectric - will still be viewable.)
5. Firmly push the cable home (a slight clockwise twist may help with insertion). Then screw the connector on the cable in a clockwise
direction until it is snuggly attached to the jacket. (Right angle connectors provide a lever to aid in twist, therefore do not over twist,
which may cause the jacket and braids to eventually wear out.)
CABLE ASSEMBLY CAUTIONS:
Series are designed for solid center conductor wire. RG-58 cable will need the center conductor tin dipped (ONLY if it is not a solid
center conductor). This is necessary to provide extra support for step 5.
RG-MATV-59 cable will require caution when using the fingernail to rotate the braids on cable types that include aluminum foil for the
outer conductor. DO NOT tear or rip the foil conductor to the 1/32” as suggested by step 3.
RG-62 cable includes trimming the filament to 9/16” as well. Make sure that the filament does not unravel so that it protrudes past this
dimension.
Part
Cable
Wire
Jacket
Number
Type
Gauge
Decimal
O.D.
CPFI-UG88-11
RG-TFE-58
20
.032 (0.81)
.165 (4.19)-.178 (4.54)
PART
CABLE
CABLE CENTER
WIRE
JACKET
NUMBER
TYPE
CONDUCTOR
GAUGE
DECIMAL
O.D.
CPFI-UG88-11
RG-58 PLENUM
SOLID
22-18
.025 (.064)-.043 (1.09)
.165 (4.19)-.178 (4.52)
相關PDF資料 |
PDF描述 |
|---|---|
| CPL-259-16 | CABLE TERMINATED, MALE, UHF CONNECTOR, CRIMP, PLUG |
| CPL-259-24 | CABLE TERMINATED, MALE, UHF CONNECTOR, CRIMP, PLUG |
| CPM-88-20A/S | CABLE TERMINATED, MALE, BNC CONNECTOR, CRIMP/SOLDER, PLUG |
| CPMC-88-16 | CABLE TERMINATED, MALE, BNC CONNECTOR, CRIMP/SOLDER, PLUG |
| CPMC-88-19T | CABLE TERMINATED, MALE, BNC CONNECTOR, CLAMP CRIMP/SOLDER, PLUG |
相關代理商/技術參數 |
參數描述 |
|---|---|
| CPFIUG88-11 | 制造商:CAMBRIDGE PRODUCTS 功能描述: |
| CPFI-UG88-1A | 制造商:SPC Multicomp 功能描述:CONNECTOR, COAXIAL, BNC, PLUG, 50 OHM, CABLE; Series:-; Connector Type:BNC Coaxial; Body Style:Straight Plug; Coaxial Termination:Twist On; Impedance:50ohm; Coaxial Cable Types:RG58; Contact Material:Brass; Contact Plating:Gold |
| CPFIUG882 | 功能描述:CONN BNC PLUG TWIST-ON RoHS:是 類別:連接器，互連式 >> 同軸，RF 系列:BNC RoHS指令信息:5221221-2 Statement of Compliance 3D 型號:5221221-2.pdf 標準包裝:1,000 系列:BNC 連接器類型:BNC 連接器類型:插孔，母插口 觸點終端:雙壓接 阻抗:75 歐姆 安裝類型:面板安裝，隔墻式（前端螺母） 緊固型:插銷鎖 纜線組:RG-59，59A，59B 頻率 - 最大:2GHz 特點:- 顏色:- 包裝:散裝 |
| CPFI-UG88-2 | 功能描述:RF 連接器 RG-59 TWIST-ON PLG RoHS:否 制造商:Bomar Interconnect 產品:Connectors 射頻系列:BNC 型式:Jack (Female) 極性: 觸點電鍍:Gold 阻抗: 端接類型:Solder 主體類型:Straight Bulkhead 電纜類型: |
| CPFIUG883 | 制造商:Emerson Connectivity Solutions 功能描述:connector,rf coaxial,bnc straight twist-on plug,for belden 8281 cable 制造商:Emerson Connectivity Solutions 功能描述:Conn BNC PL 0Hz to 4GHz 50Ohm Crimp ST Cable Mount Gold 制造商:EMERSON NETWORK POWER 功能描述:Conn BNC PL 0Hz to 4GHz 50Ohm Crimp ST Cable Mount Gold |
發布緊急采購，3分鐘左右您將得到回復。