
– 1 –
CXP81900M
E99X18-PS
CMOS 8-bit Single Chip Microcomputer
Description
The CXP81900M is a CMOS 8-bit single chip
micro-computer of piggyback/evaluator combined
type, which is developed for evaluating the function
of the CXP81952M/81960M.
Features
A wide instruction set (213 instructions) which cover
various types of data.
–16-bit operation/multiplication and division/
boolean bit operation instructions
Minimum instruction cycle
250ns at 16MHz operation (4.5 to 5.5V)
333ns at 12MHz operation (2.7 to 5.5V)
122μs at 32kHz operation
LCC type 27C256, LCC type 27C512
(Maximum 60Kbytes are available.)
2048 bytes
Applicable EPROM
Incorporated RAM capacity
Peripheral functions
– A/D converter
8-bit, 12-channel, successive approximation method
(Conversion time of 20μs/16MHz)
Incorporated buffer RAM
(Auto transfer for 1 to 32 bytes), 1 channel
Incorporated 8-bit and 8-stage FIFO
(Auto transfer for 1 to 8 bytes), 1 channel
8-bit timer, 8-bit timer/counter
19-bit time base timer
32kHz timer/counter
PPG 19-pin, 32-stage programmable
RTG 5 pins, 2 channels
PWM output 12 bits, 2 channels
(Repetitive frequency 62.5kHz/16MHz)
DA gate pulse output 13 bits, 4channels
Incorporated 26-bit and 8-stage FIFO
14 bits, 1 channel
8-bit pulse measurement counter with on-chip 6-stage FIFO
7 bits (PG5 input frequency division, FRC capture possible.)
12-bit event counter (SYNC1 input count)
20 factors, 15 vectors, multi-interruption possible
SLEEP/STOP
100-pin ceramic PQFP
– Serial interface
– Timer
– High precision timing pattern generator
– PWM/DA gate output
– FRC capture unit
– PWM output
– Remote control receiving circuit
– General purpose prescaler
– HSYNC counter
Interruption
Standby mode
Package
Note) Mask option depends on the type of the CXP81900M. Refer to the Products List for details.
Structure
Silicon gate CMOS IC
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
Piggyback/
evaluator type
100 pin PQFP (Ceramic)
QFP supported
LQFP supported