
F
LASH
370i ISR Programming Kit
CY3600i
Cypress Semiconductor Corporation
Document #: 38-03041 Rev. **
3901 North First Street
San Jose
CA 95134
408-943-2600
Revised August 24, 2001
0i
Features
Supports F
LASH
370i and Ultra37000 devices (for
Ultra37000V 3.3V support, please see the Ultra37000
ISR Programming Kit data sheet, CY3700i)
Jam programming language support for Ultra37000
devices
Standard JTAG programming interface
Multi-device programming
Supports cascading of devices
Easy to use Windows 95, Windows 98, and
Windows NT 4.0 compatible interface
Eliminates programming insertion to improve
manufacturing efficiency
For programming in the lab, on the manufacturing floor,
or at remote sites
ATE support via Jam on industry leading ATE platforms
Kit Contents
ISR (In-System Reprogrammable) Programming
Cable for use with F
LASH
370i and Ultra37000 devices
ISR Programming Software Release 2.2
ISR Application Notes
Functional Description
The ISR programming kit enables users to program F
LASH
370i
and Ultra37000 CPLDs on board with our ISR Programming
Kit, ISR programming cable, and a personal computer. The
ISR programming cable connects to the parallel port of a PC
into a standard 10-pin male connector mounted on the user
’
s
board.
ISR Programming Software
The ISR software provides an easy to use Graphical User
Interface that accepts JEDEC files as input. The JEDEC files
are used in ISR programming for F
LASH
370i CPLDs.
JEDEC files are also used to compose platform and device
independent Jam files. Jam files are used in ISR programming
for Ultra37000 CPLDs.
The ISR software reads in a simple user-defined configuration
file that dictates how many devices are in the daisy chain and
what operation is to be done on each Cypress device. The
same chain can be used with other JTAG compliant devices.
The ISR User
’
s Guide (in the CD-ROM documentation)
describes the operation of the ISR software. The application
notes included with the kit describe the Ultra37000 and
F
LASH
370i architectures and system design considerations for
programming with the F
LASH
370i ISR Programming Kit.
10-pin ISR Connector
The diagram below shows the pinout of the 10-pin male
connector to be mounted onto the board.
The view looking down onto the board is shown below.
Notes:
1.
2.
Refer to the CD-ROM ISR User
’
s Guide documentation for detailed information on ISR programming and electrical specification requirements.
Pin1 Connection.
SDO
VCC
ISR
[1]
ISRVPP
GND
[2]
GND
NC
SDI
SCLK
SMODE
ISR PC Cable Programming
VCC
Designer’s
Board
Parallel Port
10 Pin ISR connector
25-pin
cable
PC
6
’
device
F
LASH
370i
Ultra 37000
device
1
’
Interface Box