- 您現在的位置：買賣IC網 > Datasheet目錄61 > D6B-2P (Omron Electronics Inc-EMC Div)SENSR TILT 35-65DEG 1MA SMD GUL Datasheet資料下載
參數資料
| 型號： | D6B-2P |
| 廠商： | Omron Electronics Inc-EMC Div |
| 文件頁數： | 3/6頁 |
| 文件大小： | 568K |
| 描述： | SENSR TILT 35-65DEG 1MA SMD GUL |
| 產品目錄繪圖： | D6B-2P |
| 標準包裝： | 1 |
| 系列： | D6B |
| 操作角度： | 35° ~ 65° |
| 安裝類型： | 表面貼裝，鷗翼型 |
| 工作溫度： | -10°C ~ 60°C |
| 電源電壓： | 2.7 V ~ 3.3 V |
| 電流 - 輸出： | ±1mA |
| 封裝/外殼： | 4-SMD |
| 包裝： | 剪切帶 (CT) |
| 其它名稱： | Z2506CT |
Micro Tilt Sensor D6B
3
Precautions
"The Sensor does not use any materials detrimental to the ozone
layer.
" Specifications other than the electrical or mechanical characteris-
tics, external dimensions, or mounting dimensions of the Sensor
are subject to change without notice.
?SPAN class="pst D6B-2P_2587512_7">Handling Precautions
Operating Environment
" The Sensor consists of a Hall IC and a magnet. Check that the
Sensor in operation will not be influenced by any external magnetic
fields.
" Do not install any magnetic materials within 2 mm of the Sensor,
else the performance characteristics of the Sensor may not be
guaranteeable. If there are any objects (e.g., motors and solenoids)
generating magnetic fields near the Sensor, operate and test the
Sensor before the Sensor comes into actual use.
" Do not apply any voltage exceeding 5V to the Sensor, else the Sen-
sor may break.
" Do not wash the Sensor after the Sensor is soldered.
" Do not mount or dismount the Sensor while power is flowing to the
Sensor.
" The Sensor may generate error signals if impacted at a minimum
acceleration of 294 m/s
2
.
" The Sensor may generate error signals if a vibration at a minimum
frequency of 15 Hz and a minimum acceleration of 15m/s
2
is
applied to the Sensor.
" Confirm that no static electricity at a maximum voltage of 5kV is
applied to the pins, else the Sensor may break.
Operating Characteristics
The present output may stay unchanged if the inclination of the Sen-
sor back and forth is 20?or more. Under that condition, the output
might not change even when the Sensor is leaned left or right.
Tape Packing
?SPAN class="pst D6B-2P_2587512_7">Reel Dimensions
Note: 1. This packing conforms to standard of EIAJ.
2. Quantity per reel: 2,000 pieces.
3. Each reel is packaged within a sealed bag to protect the sensor from the effects of moisture and humidity. In order to maintain optimal
solderability and performance, after the bags seal is broken, ensure that storage conditions do not exceed 30癈, 80% RH and that reflow
soldering/assembly occurs within two months.
Direction
of gravity
If the Sensor is kept inclined back or forth as shown in the above
illustration, the level of output might not change from high to low or low to
high when the Sensor inclines left or right.
20 min.
20 min.
(Example)
相關PDF資料 |
PDF描述 |
|---|---|
| D7E-3 | SENSOR TILT 50-80DEG 0.1A GRY |
| DSBA1H | SENSOR TILT SW 30-60DEG 20MA TH |
| EE-SA103 | SENSOR OPTO SLOT 3MM TRANS THRU |
| EE-SA107-P2 | OPTO SENSOR 3.6MM TRANS |
| EE-SH3-DS | SENS OPTO SLOT 3.4MM TRANS SOLDR |
相關代理商/技術參數 |
參數描述 |
|---|---|
| D6B-2P | 制造商:Omron Electronic Components LLC 功能描述:Tilt Switch |
| D6BN | 制造商:OMRON 制造商全稱:Omron Electronics LLC 功能描述:Micro Tilt Sensor |
| D6BN1 | 功能描述:振動與傾斜傳感器 RoHS:否 制造商:Murata 工作角: 安裝風格:SMD/SMT 系列:SCA100T 封裝: |
| D6BN-1 | 制造商:Omron Electronic Components LLC 功能描述:SENSOR TILT PCB MOUNT |
| D6BN-1(100) | 功能描述:振動與傾斜傳感器 Micro-Tilt Switch RoHS:否 制造商:Murata 工作角: 安裝風格:SMD/SMT 系列:SCA100T 封裝: |
發布緊急采購，3分鐘左右您將得到回復。