- 您現在的位置：買賣IC網 > PDF目錄376665 > DF22BR-5EP-7.92C (Hirose Electric USA, INC.) Dual High-Speed Low-Noise Operational Amplifier 8-PDIP -40 to 85 PDF資料下載
參數資料
| 型號： | DF22BR-5EP-7.92C |
| 廠商： | Hirose Electric USA, INC. |
| 英文描述： | Dual High-Speed Low-Noise Operational Amplifier 8-PDIP -40 to 85 |
| 中文描述： | 7.92毫米聯系間距，大電流的內部電源連接器（UL認證，及C - UL和TUV認證） |
| 文件頁數： | 15/15頁 |
| 文件大小： | 569K |
| 代理商： | DF22BR-5EP-7.92C |
15
Item
Part Number
CL No.
Applicable Contacts
Type
Press unit
Applicators are used in automatic crimping
machines manufactured by Hirose Electric
Applicators are used in automatic
crimping machines manufactured by
other companies
Crimp tools
CM-105
AP105-DF22-1416
AP105-DF22A-1416
AP109A-DF22-1416
AP109A-DF22A-1416
AP109A-DF22A-1012
HT104/DF22-1416
HT104/DF22A-1416
HT103/DF22A-1012
901-0005-4
901-4576-7
901-4578-2
901-4579-5
901-4580-4
901-4582-0
550-0285-0
550-0286-2
550-0288-8
DF22/DF22A-1416SCF/PCF
DF22-1416SCF/PCF
DF22A-1416SCF/PCF
DF22-1416SCF/PCF
DF22A-1416SCF/PCF
DF22A-1012SCF
DF22-1416SC/PC
DF22A-1416SC/PC
DF22A-1012SC
Automatic
Manual
B
Tools
B
Contact Extraction
I
Contact extraction tool: Flat-bladed screwdriver, 1.4 mm blade width
I
Intended crimp Contacts: DF22-1416SC(F), DF22A-1416SC(F), DF22A-1012SC(F), DF22-1416PC(F), and DF22A-1416PC(F)
I
Work Method
Housing Cross-Sectional Diagram
B
Precautions
G
Make sure that the lock is fully depressed before un-mating the connectors.
G
Use correct size of the wires. Do NOT forcefully twist or deform wires, as this may affect the
crimped contact connection.
Molded-in lance
Flat-bladed screwdriver
(1)
(2)
1. Refer to the drawing No. 1. Insert
correct size screwdriver in the
insulator against the molded-in
lance. Deflect the lance as shown.
2. Assure that the lance is deflected
to release the contact and pull- out
wire with the terminated contact.
Note 1: When crimping contact DF22A-1012SCF use a press with 3.5 ton min.
Note 2: AP109A type applicators cannot be used with the CM-105 press.
相關PDF資料 |
PDF描述 |
|---|---|
| DF22BR-5P-7.92C | Quad Low-Power General-Purpose Operational Amplifier 14-SOIC 0 to 70 |
| DF22C-4S-7.92C | Quadruple Differential Line Receiver With 3-State Outputs 16-SO 0 to 70 |
| DF22C-4S-7.92DS | 7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TUV Listed) |
| DF22C-4S-7.92DSA | Quadruple Differential Line Driver 16-SOIC 0 to 70 |
| DF22CL-1DEP-7.92C | Quadruple Differential Line Driver 16-SOIC 0 to 70 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DF22BR-5P-7.92C | 制造商:HRS 制造商全稱:HRS 功能描述:7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TUV Listed) |
| DF22BR-5P-7.92DS | 制造商:HRS 制造商全稱:HRS 功能描述:7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TUV Listed) |
| DF22BR-5P-7.92DSA | 制造商:HRS 制造商全稱:HRS 功能描述:7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TUV Listed) |
| DF22BR-5RS/P-7.92 | 制造商:HRS 制造商全稱:HRS 功能描述:7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TUV Listed) |
| DF22BR-5S-7.92C | 制造商:HRS 制造商全稱:HRS 功能描述:7.92 mm Contact Pitch, High-Current Connectors for Internal Power Supplies (UL, C-UL and TUV Listed) |
發布緊急采購，3分鐘左右您將得到回復。