- 您現在的位置：買賣IC網 > PDF目錄376695 > DF7-5EP-3.96DSA (Hirose Electric USA, INC.) RES 10K0 SM 1/4W B 1206CS THNF T&R PDF資料下載
參數資料
| 型號： | DF7-5EP-3.96DSA |
| 廠商： | Hirose Electric USA, INC. |
| 英文描述： | RES 10K0 SM 1/4W B 1206CS THNF T&R |
| 中文描述： | 三點九六毫米間距微型連接器內部電源（UL認證，及C - UL和TUV認證） |
| 文件頁數： | 1/16頁 |
| 文件大小： | 666K |
| 代理商： | DF7-5EP-3.96DSA |
1
3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TüV Listed)
DF7 Series
2004.7
I
Features
1. Complete Locking Function
Reliable interior lock protects mated connectors from
accidental disconnection.
2. Increased Contact Retention of Crimped
Contacts and Prevention of Incomplete
Insertion
Separate contact retainer increases the contact
retention, assures and visually confirms the complete
contact insertion.
3. Molded-in Contact Retention Tabs
Handling of terminated contacts during the assembly and
termination is easier and avoids entangling of wires,
since there are no protruding metal tabs.
4. Incorrect Insertion Prevention
Connectors are polarized to assure correct mating with
corresponding parts.
5.Solder Crack Prevention
Glass reinforced resin is used in the pin header bodies to
prevent solder cracks caused by the heat shrinkage.
6. Prevention of Incorrect Board Placement
Built-in locating posts assure correct connector
placement and orientation on the board.(2-12 pos.)
7. Supports Sealing after Installation.
Sealing compound can be applied to the board installed
connector for distance of 6 mm max. from the mounting
surface (9 mm max. for single position).
8.Cost Effective Tooling
The same crimping tools are used to terminate socket
and pin contacts.
9. Prevention of Short Circuits between
Adjacent Contacts
Each contact is completely surrounded by the insulator
housing, electrically isolating it from adjacent contacts.
Completely
enclosed
locking system
Complete
Locking
Function
Board Eyelet mounting
One pos. type can also be mounted
to boards that have eyelets.
Continued.
Guide post
Prevention of
Incorrect Connections
Full barrier
between adjacent
contacts.
相關PDF資料 |
PDF描述 |
|---|---|
| DF7-5P-3.96C | RES, 10K, 1/8W, 0.1%, 1206 |
| DF7-5P-3.96DS | 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TUV Listed) |
| DF7-5P-3.96DSA | 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TUV Listed) |
| DF7-5S-3.96C | 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TUV Listed) |
| DF7-5S-3.96DS | 3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TUV Listed) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DF75LA160 | 制造商:SANREX 制造商全稱:SanRex Corporation 功能描述:DIODE(THREE PHASES BRIDGE TYPE) |
| DF75LA80 | 制造商:SANREX 制造商全稱:SanRex Corporation 功能描述:DIODE(THREE PHASES BRIDGE TYPE) |
| DF75LB160 | 制造商:SANREX 制造商全稱:SanRex Corporation 功能描述:DIODE(THREE PHASES BRIDGE TYPE) |
| DF75LB80 | 制造商:SANREX 制造商全稱:SanRex Corporation 功能描述:DIODE(THREE PHASES BRIDGE TYPE) |
| DF7-5P-3.96C | 制造商:HRS 制造商全稱:HRS 功能描述:3.96 mm Pitch Miniature Connectors for Internal Power Supplies (UL,C-UL and TUV Listed) |
發布緊急采購，3分鐘左右您將得到回復。