- 您現在的位置：買賣IC網 > PDF目錄376727 > DK1241A (Electronic Theatre Controls, Inc.) Advanced Microstepping Motion Control Chipset PDF資料下載
參數資料
| 型號： | DK1241A |
| 廠商： | Electronic Theatre Controls, Inc. |
| 英文描述： | Advanced Microstepping Motion Control Chipset |
| 中文描述： | 高級微步運動控制芯片組 |
| 文件頁數： | 40/60頁 |
| 文件大小： | 422K |
| 代理商： | DK1241A |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁當前第40頁第41頁第42頁第43頁第44頁第45頁第46頁第47頁第48頁第49頁第50頁第51頁第52頁第53頁第54頁第55頁第56頁第57頁第58頁第59頁第60頁
40
GET_MAX_ACC
Data/direction:
Encoding:
Axis acted on:
Available on:
Double buffered:
Get maximum acceleration
1/read
4f (hex)
current axis
all axes
-
GET_MAX_ACC returns the max. acceleration value set using the
SET_MAX_ACC command. It returns the double-buffered value (set
directly by the host), which may or may not correspond to the active
value, depending on whether the profile parameters have been
updated. The returned acceleration is an unsigned 16-bit number in
1/216 format with units of usteps/cycle2.
This command is used when the profile mode is set to S-curve
point to point.
GET_JERK
Data/direction:
Encoding:
Axis acted on:
Available on:
Double buffered:
Get command jerk
2/read
58 (hex)
current axis
all axes
-
GET_JERK returns the jerk value set using the SET_JERK command.
It returns the double-buffered value (set directly by the host), which may
or may not correspond to the active value, depending on whether the
profile parameters have been updated. The returned jerk is an
unsigned 32-bit number with 1/232 scaling with units of usteps/cycle3.
GET_RATIO
Data/direction:
Encoding:
Axis acted on:
Available on:
Double buffered:
Get command gear ratio
2/read
59 (hex)
current axis
all axes
-
GET_RATIO returns the gear ratio set using the SET_RATIO
command. It returns the double-buffered value (set directly by the host),
which may or may not correspond to the active value, depending on
whether the profile parameters have been updated. The returned ratio
is a signed 32-bit number in 1/216 format.
GET_START_VEL
Data/direction:
Encoding:
Axis acted on:
Available on:
Double buffered:
Get starting velocity
2/read
6b (hex)
current axis
all axes
-
GET_START_VEL returns the starting velocity set using the
SET_START_VEL command. The returned starting velocity is an
unsigned 32-bit number using 1/216 scaling with units of usteps/cycle.
GET_TRGT_POS
Data/direction:
Encoding:
Axis acted on:
Available on:
Double buffered:
Return target position
2/read
1d (hex)
current axis
all axes
-
GET_TRGT_POS returns the current desired position value being
generated by the trajectory profile generator. This value represents the
target position for the axis at the current cycle time, i.e. the position
being output by the trajectory profile generator at the time of the
command. This command operates for all profile modes. The value
returned is a 32-bit signed number with units of usteps. The range is -
1,073,741,824 to 1,073,741,823.
GET_TRGT_VEL
Data/direction:
Encoding:
Axis acted on:
Available on:
Double buffered:
Return target velocity
2/read
1e (hex)
current axis
all axes
-
GET_TRGT_VEL returns the current desired velocity value being
generated by the trajectory profile generator. This value represents the
target velocity for the axis at the current cycle time, i.e. the velocity
being output by the trajectory profile generator at the time of the
command. This command operates for all profile modes. The value
returned is a 32 bit signed number with units of usteps/cycle,
represented in 1/216 format. The range is -1,073,741,824 to
+1,073,741,823.
Parameter Update
SET_TIME_BRK
Data/direction:
Encoding:
Axis acted on:
Available on:
Double buffered:
Set break point mode to time based
none
17 (hex)
current axis
all axes
no
SET_TIME_BRK sets the current breakpoint mode to time based. In
this mode the value loaded into the breakpoint register (SET_BRK_PNT
cmd) will represent the number of cycles since chip set power on. After
the SET_TIME_BRK command is executed, at each loop the break
point value will be compared against the current chip set time. If the
values are equal all double-buffered parameters will be loaded in to the
active registers. See GET_TIME cmd for information on the chip set
time. After this breakpoint condition has been satisfied, the breakpoint
mode is reset i.e. no additional breakpoints will occur until a new
breakpoint condition is set.
相關PDF資料 |
PDF描述 |
|---|---|
| DK2100 | Navigator Motion Processor |
| DK3300 | Turbo uPSD DK3300 User Manual(Turbo系列 uPSD DK3300 用戶手冊) |
| DK60 | DIODY PROSTOWNICZE |
| DK61 | DIODY PROSTOWNICZE |
| DK62 | DIODY PROSTOWNICZE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| DK125950 | 制造商:TE Connectivity 功能描述: |
| DK-125M-1 | 制造商:Luminus Devices 功能描述:EVAL BOARD & HEAT SINK FOR PT85/CBT85. MAX16818, 25A, 1 CH - Bulk |
| DK12GY | 功能描述:電氣外殼 RoHS:否 制造商:Bud Industries 產品:Wall Mount Enclosures 類型:Single Door NEMA 額定值:3R 外部深度:254 mm 外部高度:305 mm 外部寬度:305 mm 面板寬度:261 mm 面板高度:261 mm 材料:Steel 顏色:Gray 通風:Not Available |
| DK12LG | 功能描述:電氣外殼 RoHS:否 制造商:Bud Industries 產品:Wall Mount Enclosures 類型:Single Door NEMA 額定值:3R 外部深度:254 mm 外部高度:305 mm 外部寬度:305 mm 面板寬度:261 mm 面板高度:261 mm 材料:Steel 顏色:Gray 通風:Not Available |
| DK12S16 | 功能描述:電氣外殼 RoHS:否 制造商:Bud Industries 產品:Wall Mount Enclosures 類型:Single Door NEMA 額定值:3R 外部深度:254 mm 外部高度:305 mm 外部寬度:305 mm 面板寬度:261 mm 面板高度:261 mm 材料:Steel 顏色:Gray 通風:Not Available |
發布緊急采購，3分鐘左右您將得到回復。