| 品牌 | 南麟 natlinear | 型號 | ln2055 |
| 批號 | 0000 | 封裝 | dfn1.8x2-6l |
| 營銷方式 | 現貨 | 產品性質 | 新品 |
| 處理信號 | 模擬信號 | 工藝 | 半導體集成 |
| 集成程度 | 小規模 | 工作溫度 | -40~85（℃） |
| 靜態功耗 | 0.01（mw） |
■description
the ln2055 is a complete constant-current/constant-voltage linear charger for single cell lithium-ion batteries. its dfn package and low external component count make the ln2055 ideally suited for portable applications. furthermore, the ln2055 is specifically designed to work within usb power specifications.
no external sense resistor is needed, and no blocking diode is required due to the internal mosfet architecture. thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. the charge voltage is fixed at 4.2v, and the charge current can be programmed externally with a single resistor. the ln2055 automatically terminates the charge cycle when the charge current drops to 1/10ththe programmed value after the final float voltage is reached.
the internal hot swap circuit can protected the circuit from damage when the adapter or usb plug-in-out. when the input supply (wall adapter or usb supply) is removed, the ln2055 automatically enters a low current state, dropping the battery drain current to less than 2ma. the ln2055 can be put into shutdown mode, reducing the supply current to 25ma.
other features include charge current monitor, under-voltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage.
■features
l programmable charge current up to 600ma
l no mosfet, sense resistor or blocking diode required
l complete linear charger in dfn package for single cell lithium-ion batteries
l constant-current/constant-voltage operation with thermal regulation to maximize charge rate without risk of overheating
l charges single cell li-ion batteries directly from usb port
l preset 4.2v charge voltage with±1% accuracy
l charge current monitor output for gas gauging
l automatic recharge
l charge status output pin
l hot swap protected
■description
the ln2055 is a complete constant-current/constant-voltage linear charger for single cell lithium-ion batteries. its dfn package and low external component count make the ln2055 ideally suited for portable applications. furthermore, the ln2055 is specifically designed to work within usb power specifications.
no external sense resistor is needed, and no blocking diode is required due to the internal mosfet architecture. thermal feedback regulates the charge current to limit the die temperature during high power operation or high ambient temperature. the charge voltage is fixed at 4.2v, and the charge current can be programmed externally with a single resistor. the ln2055 automatically terminates the charge cycle when the charge current drops to 1/10ththe programmed value after the final float voltage is reached.
the internal hot swap circuit can protected the circuit from damage when the adapter or usb plug-in-out. when the input supply (wall adapter or usb supply) is removed, the ln2055 automatically enters a low current state, dropping the battery drain current to less than 2ma. the ln2055 can be put into shutdown mode, reducing the supply current to 25ma.
other features include charge current monitor, under-voltage lockout, automatic recharge and a status pin to indicate charge termination and the presence of an input voltage.
■features
l programmable charge current up to 600ma
l no mosfet, sense resistor or blocking diode required
l complete linear charger in dfn package for single cell lithium-ion batteries
l constant-current/constant-voltage operation with thermal regulation to maximize charge rate without risk of overheating
l charges single cell li-ion batteries directly from usb port
l preset 4.2v charge voltage with±1% accuracy
l charge current monitor output for gas gauging
l automatic recharge
l charge status output pin
l hot swap protected
l c/10 charge termination
l 25ma supply current in shutdown
l 2.9v trickle charge threshold (ln2055)
l soft-start limits inrush current
■applications
l cellular telephones, pdas, mp3 players
l charging docks and cradles
l bluetooth applications
■package
l dfn1.8x2-6l
l c/10 charge termination
l 25ma supply current in shutdown
l 2.9v trickle charge threshold (ln2055)
l soft-start limits inrush current
■applications
l cellular telephones, pdas, mp3 players
l charging docks and cradles
l bluetooth applications
■package
l dfn1.8x2-6l