壓敏電阻是以氧化鋅為材料燒結而成的半導體限壓型浪涌器件;

它以其優異的非線性特性和高的浪涌吸收能力被廣泛應用于電子電路中進行保護。

產品主要用在交/直流電源電路及各類低頻信號、控制電路板及相關的防雷模塊上作浪涌保護。

壓敏電壓可從18v至1800v;單體同流量可達70ka甚至更高,本體直徑有φ5,φ7,φ10,φ14,φ20,φ25,φ32,φ40,φ53及34*34方片等其他規格尺寸,也可為客戶定制規格。

產品通過一系列的國際安規認證:ul、vde、csa及相關的無鉛認證,符合mov在spd上浪涌測試標準和iec61643-331-2003標準

metal oxide varistors (mov’s) use zinc oxide that has been heat treated and formed into a disc.  the zinc oxide disc acts as a non-linear resistor, clamping the voltage at a given level.

most applications for mov’s are in power transmission lines and circuits that are controlled by low frequency signals.

brightking provide a full range of mov’s, with break-down voltages from 18v to 1800v and surge currents of up to 70ka or more.  the company offers round varistors with diameter sizes (measured in millimetrer) of: φ5, φ7, φ10, φ14, φ20, φ25, φ32, φ40 & φ53.  a square model with 34mm sides is available and custom-made sizes are also possible.

brightking mov products are rohs weee compliant and meet the following standards and certifications: ul; vde; csa.  brightking mov products may be incorporated into spd’s that are certified to standard ice 61643-331-2003.