
Pb
RoHS
EC3725ETTTS-102.400M TR
EC37 25 ET T TS -102.400M TR
Series
RoHS Compliant (Pb-free) Ceramic 3.2mm x 5mm SMD
2.5V LVCMOS Oscillator
Frequency Tolerance/Stability
±25ppm Maximum
Operating Temperature Range
-40°C to +85°C
Duty Cycle
50 ±5(%)
Packaging Options
Tape & Reel
Nominal Frequency
102.400MHz
Pin 1 Connection
Tri-State (High Impedance)
ELECTRICAL SPECIFICATIONS
Nominal Frequency
102.400MHz
Frequency Tolerance/Stability
±25ppm Maximum (Inclusive of all conditions: Calibration Tolerance at 25°C, Frequency Stability over the
Operating Temperature Range, Supply Voltage Change, Ouput Load Change, First Year Aging at 25°C,
Shock, and Vibration)
Operating Temperature Range
-40°C to +85°C
Supply Voltage
2.5Vdc ±5%
Input Current
30mA Maximum
Output Voltage Logic High (Voh)
90% of Vdd Minimum ((IOH = -4mA))
Output Voltage Logic Low (Vol)
10% of Vdd Maximum ((IOL = +4mA))
Rise/Fall Time
2nSec Maximum (Measured at 20% to 80% of waveform)
Duty Cycle
50 ±5(%) (Measured at 50% of waveform)
Load Drive Capability
15pF Maximum
Output Logic Type
CMOS
Pin 1 Connection
Tri-State (High Impedance)
Tri-State Input Voltage (Vih and Vil)
90% of Vdd Minimum or No Connect to Enable Output, 10% of Vdd Maximum to Disable Output (High
Impedance)
Standby Current
10A Maximum (Disabled Output: High Impedance)
RMS Phase Jitter
1pSec Maximum (12kHz to 20MHz offset frequency)
Start Up Time
10mSec Maximum
Storage Temperature Range
-55°C to +125°C
ENVIRONMENTAL & MECHANICAL SPECIFICATIONS
ESD Susceptibility
MIL-STD-883, Method 3015, Class 1, HBM: 1500V
Fine Leak Test
MIL-STD-883, Method 1014, Condition A
Flammability
UL94-V0
Gross Leak Test
MIL-STD-883, Method 1014, Condition C
Mechanical Shock
MIL-STD-883, Method 2002, Condition B
Moisture Resistance
MIL-STD-883, Method 1004
Moisture Sensitivity
J-STD-020, MSL 1
Resistance to Soldering Heat
MIL-STD-202, Method 210, Condition K
Resistance to Solvents
MIL-STD-202, Method 215
Solderability
MIL-STD-883, Method 2003
Temperature Cycling
MIL-STD-883, Method 1010, Condition B
Vibration
MIL-STD-883, Method 2007, Condition A
www.ecliptek.com | Specification Subject to Change Without Notice | Rev F 3/11/2011 | Page 1 of 6