
Original specifications created by Sharp.
1
Panelview (503) 690-2460 www.whiteedc.com
Panelview is a subsidiary of White Electronic Designs Corporation
ENH038Q1-450/600/650
Panelview
Enhancing the Vision
August 2003 Rev. 0
ENH038Q1-XXX
ENH038Q1-450/600/650 Color TFT-LCD Module Features
GENERAL DESCRIPTION
Panelview provides optically enhanced solutions to the
standard Sharp LQ038Q1DR01 color active matrix LCD
module. The first enhancement is an index matching
(IM) film lamination to the front surface of the display
polarizer. The IM film is available in two surface
treatments - IM/Clear and IM/110 (a 10% diffusion).
The second enhancement is the incorporation of a
reflective polarizer (RP) to improve brightness by up to
40%. The third enhancement is the addition of prism
films (RPp) further increasing the brightness of the
display.
This module is composed of a color TFT-LCD panel,
driver ICs, control PWB, FPC, frame, front shielding
case, backlight unit.
Graphics and text can be displayed on a 320 x 3 x 240
dots panel with 262,144 colors.
The 3.8 screen produces a high resolution image that
is composed of 76,800 pixel elements in a stripe
arrangement.
MECHANICAL SPECIFICATIONS
Parameter
Specifications
Units
Remarks
Display Format
76,800
pixels
320 (W) x RGB x 240 (H)
dots
Active Area
78.72 (W) x 53.64 (H)
mm
Screen Size (Diagonal)
9.6 [3.8"]
cm
Dot Pitch
0.082 (W) x 0.2235 (H)
mm
Pixel Configuration
RGB Stripe configuration
Outline Dimension
117.6 x 69.45 x 13.45
mm
(1)
Mass
125 ±10
g
Surface Treatment
IM/Clear (glossy) or IM/110 and hardcoat 3H
Note: Typical values are given. For detailed measurements and tolerances, please refer to Fig. 1.
Wide viewing angle technology is employed. (The most
suitable viewing angle is in the 6 oclock direction.)
By adopting an active matrix drive, a picture with high
contrast is achieved.
Through the use of TN normally white mode, an image
with high natural color image is achieved.
It uses the Low reflection (LR) and an antiglare (AG)
surface polarization plate.
An inverted video display in the vertical and horizontal
directions is possible.
Panelview assumes no responsibility for any damage
resulting from the use of the device which does not
comply with the instructions and the precautions
specified in these specification sheets. Panelview does
assume the responsibility for the warranty of the
enhanced product.