
Original specifications created by Sharp.
1
Panelview (503) 690-2460 www.whiteedc.com
Panelview is a subsidiary of White Electronic Designs Corporation
ENH050Q1-320/450/600
Panelview
Enhancing the Vision
August 2003 Rev. 0
ENH050Q1-XXX
ENH050Q1-320/450/600 Color TFT-LCD Module Features
GENERAL DESCRIPTION
Panelview provides optically enhanced solutions to the
standard Sharp LQ5AW136 color active matrix LCD
module. The first enhancement is an index matching
(IM) film lamination to the front surface of the display
polarizer.
The IM film is available in two surface treatments - IM/
Clear and IM/110 (a 10% diffusion). The second
enhancement is the incorporation of a reflective
polarizer (RP) to improve brightness by up to 40%. The
third enhancement is the addition of prism films (RPp)
further increasing the brightness of the display. The
module accepts full color video signals conforming to
the NTSC(M) and PAL(B-G) system standards.
It can withstand an intense environment, the outline
dimension is suitable for an automotive display,
compact size, compatible with 2DIN size.
Panelview assumes no responsibility for any damage
resulting from the use of the device which does not
comply with the instructions and the precautions
specified in these specification sheets. Panelview
does assume the responsibility for the warranty of the
enhanced product.
FEATURES
■
Dual mode type. [NTSC(M) and PAL(B-G) standards]
■
MBK-PAL enables the 234-scanning lines panel to
display a picture with virtually 273-scanning lines.
■
TFT-active matrix-LCD drive system with high
contrast.
■
74,880 pixels (RGB Stripe configuration and full
color) 5" diagonal size.
■
Slim, lightweight and compact
1)
Active area/Outline area=70%
2)
Thickness: 16.5mm
3)
Mass: 185g (Max)
■
Built-in video interface circuit and control circuit
responsive to two sets of standard RGB analog video
signals.
■
Reduced reflection as a result of low reflectance
Black-Matrix and Index Matching (IM) film laminationi.
IM is available in two surface treatments, IM/Clear
(glossy) and IM/110 (10% diffusion).
■
It is possible to use both the simultaneous and the
independent time sampling.
■
An external clock mode is available.
■
Optical viewing angle: wide view angle (6 oclock
direction.) (Customers can use this module as a 12
oclock viewing direction type by using a display
rotating function to rotate right/left and up/down
scanning direction electrically.)
■
This module includes a high luminance edge light
that is excellent at low temperature.
■
It is possible to use the dimming frequency(PWM)
for backlight.
CONSTRUCTION AND OUTLINE
■
Outline dimensions of TFT-LCD module: See Fig. 3
■
The module consists of a TFT-LCD panel, driver IC's,
control PWB mounted with electronic circuits, edge
light, frame, front and rear shielding cases. (Backlight
driving DC/AC inverter is not built in the module.)
MECHANICAL SPECIFICATION
Parameter
Specification
Unit
Display format
74,880
Pixels
960(W) x 234(H)
dots
Active area
102.2(W) x 74.8(H)
mm
Screen size (Diagonal)
13 (5")
cm
Dot pitch
0.1065(W) x 0.3195(H)
mm
Dot configuration
RGB Stripe configuration
Outline dimension (1)
126.8 (W) x 89.6 (H) x 16.5 (D)
mm
Mass
185 (Max)
g
Note: This measurement is typical, and see Fig.3 for details .