- 您現在的位置：買賣IC網 > PDF目錄371736 > FH21-05S-1DS (Hirose Electric USA, INC.) 1mm Pitch FPC/FFC Connector PDF資料下載
參數資料
| 型號： | FH21-05S-1DS |
| 廠商： | Hirose Electric USA, INC. |
| 英文描述： | 1mm Pitch FPC/FFC Connector |
| 中文描述： | 1mm間距FPC / FFC連接 |
| 文件頁數： | 1/4頁 |
| 文件大小： | 104K |
| 代理商： | FH21-05S-1DS |
D15
1mm Pitch FPC/FFC Connector
FH 21 Series
I
Features
1. LIF (Low Insertion Force) Mechanism
LIF mechanism secures mounting serviceability.
2. Kink Mechanism
DIP post is treated with kinks, and prevent connector
floating in the soldering process.
3. Contact Structure on Both Sides
The contact structure on both sides does restrict
directionality of FPC and FFC conductors.
I
Applications
HDD, facsimiles, printers, and crystal liquie modules, etc.
I
Product Specifications
Rating
Rated Current: 0.5A
Rated Voltage: 50V AC
Operating Temperature Range:
-
30
~
+70
(Note 1)
Storage Temperature Range: -10
~
+50
(Note 2)
Operating Humidity Range: Relative humidity 90% max.
Storage Humidity Range: Relative Humidity: 90% max.
(Not dewed)
(Not dewed)
Applicable FPC
t=0.3
±
0.05 Solder plating
Note 1. Temperature rise included when energized
Note 2. This storage indicates a long-term storage state for the unused product before the board mounted.
Note 2.
The operating temperature and humidity ranges are applied to the non-energized state after the connector has been
installed in the board.
Note 3. The above standards represent this series. The individual formal agreement should be based on the "Specification".
Item
Specification
Condition
1. Insulation Resistance
2. Withstand voltage
500M
min.
Measured at 100V DC
150V AC for 1 minute
Neither short nor breakdown should occur
3. Contact Resistance
40m
*
FPC conductor resistance included
Contact resistance: 40m
max.
Measured at 100mA
4.
Mechanical
Operation
10 cycles
No part should be damaged, cracked, or loosened
Electrical discontinuity, 1
μ
S max.
Contact resistance: 40m
Frequency 10~55Hz and single amplitude 0.75mm in
5.
Vibration
3 directions for 2 hours, respectively.
No part should be damaged, cracked, or loosened
Electrical discontinuity, 1
μ
S max.
Contact resistance: 40m
max.
No part should be damaged, cracked, or loosened
Contact resistance: 40m
max.
Acceleration: 490m/s, duration: 11ms, sine half-wave
in 3 directions for 3 cycles, respectively
6.
Shock
7.
Moisture Resistance
Exposed to temperature 60
and humidity 90
~
95
%
for 96 hours
7.
in Steady State
Insulation resistance: 50M
max.
No part should be damaged, cracked, or loosened
相關PDF資料 |
PDF描述 |
|---|---|
| FH21-05S-1DSA | 1mm Pitch FPC/FFC Connector |
| FH21-06S-1DS | 1mm Pitch FPC/FFC Connector |
| FH21-06S-1DSA | 1mm Pitch FPC/FFC Connector |
| FH21-08S-1DS | 1mm Pitch FPC/FFC Connector |
| FH21-08S-1DSA | 1mm Pitch FPC/FFC Connector |
相關代理商/技術參數 |
參數描述 |
|---|---|
| FH21-05S-1DSA | 制造商:HRS 制造商全稱:HRS 功能描述:1mm Pitch FPC/FFC Connector |
| FH21-06S-1DS | 制造商:HRS 制造商全稱:HRS 功能描述:1mm Pitch FPC/FFC Connector |
| FH21-06S-1DSA | 制造商:HRS 制造商全稱:HRS 功能描述:1mm Pitch FPC/FFC Connector |
| FH21-08S-1DS | 制造商:HRS 制造商全稱:HRS 功能描述:1mm Pitch FPC/FFC Connector |
| FH21-08S-1DSA | 制造商:HRS 制造商全稱:HRS 功能描述:1mm Pitch FPC/FFC Connector |
發布緊急采購，3分鐘左右您將得到回復。