- 您現在的位置：買賣IC網 > PDF目錄67430 > FHS21ZKT9 (POWER-ONE INC) 1-OUTPUT 500 W DC-DC REG PWR SUPPLY MODULE PDF資料下載
參數資料
| 型號： | FHS21ZKT9 |
| 廠商： | POWER-ONE INC |
| 元件分類： | 電源模塊 |
| 英文描述： | 1-OUTPUT 500 W DC-DC REG PWR SUPPLY MODULE |
| 文件頁數： | 1/11頁 |
| 文件大小： | 160K |
| 代理商： | FHS21ZKT9 |
FHS Series – 500W Full-Brick DC/DC Converter
48V Input
Preliminary Data Sheet
12V, 24V, 28V Output
REV. SEP 20, 2002
Page 1 of 11
Applications
Distributed power architectures
Telecommunications equipment
LAN/WAN applications
Data processing applications
Features
Low profile – 12.7 mm height
Input/output isolation: 1500VDC, Basic
insulation, 2250VDC withstand capability
High efficiency - up to 93% at full load
Start-up into high capacitive load
Low conducted and radiated EMI
Output overcurrent protection
Output overvoltage protection
Overtemperature protection
Remote sense
Remote on/off (primary referenced), positive
or negative logic option
Output voltage trim adjust, positive or
negative option
UL 1950 Recognition, CSA 22.2 No. 950-95
certification, TUV IEC950
Description
The FHS Series power modules are DC/DC converters that operate over an input voltage range of 36 to 75VDC and
provide a regulated DC output voltage at up to 42 amps of output current. The output is fully isolated from the input,
which allows a positive or negative output configuration.
The open-frame module is constructed with a two-board approach.
The power devices are connected to an
Insulated Metal Substrate (IMS) base plate, which provides very low thermal impedance.
A separate PCB is
populated with the control circuitry and is physically isolated from the hotter IMS board. This approach allows for
lower component temperatures, hence increased reliability. The standard feature set includes remote on/off, remote
output voltage sensing, positive logic output trim (optional negative logic output trim available), input under and
overvoltage lockout and overtemperature shutdown with hysteresis.
A microcontroller has been employed within the supervisory circuitry offering increased flexibility in the product’s
feature set. (Remote on/off logic can be selected at the time of manufacture to be either positive or negative with a
simple program change.
Similarly, overcurrent protection and output overvoltage protection functions can be
changed from the normal non-latching mode to latching mode with a simple program change. Specific changes
should be discussed with the factory.)
Selection Chart
Model
Input
voltage
(VDC)
Input
current,
Max, (ADC)
Output
voltage
(VDC)
Output rated
current
I rated, (ADC)
Output
Ripple/Noise
(mV p-p)
Typical
Efficiency
@ I rated, (%)
FHS42ZH
36-75
16
12
42
100
92.5
FHS21ZK
36-75
16
24
21
150
92.5
FHS18Z28
36-75
16
28
18
150
93
This product is intended for integration into end-use equipment. All the required procedures for CE marking of end-use
equipment should be followed
.
相關PDF資料 |
PDF描述 |
|---|---|
| FHS42ZHNT9 | 1-OUTPUT 500 W DC-DC REG PWR SUPPLY MODULE |
| FHS21ZKN8 | 1-OUTPUT 500 W DC-DC REG PWR SUPPLY MODULE |
| FHS21ZKT | 1-OUTPUT 500 W DC-DC REG PWR SUPPLY MODULE |
| FHS42ZH8 | 1-OUTPUT 500 W DC-DC REG PWR SUPPLY MODULE |
| FHS42ZH9 | 1-OUTPUT 500 W DC-DC REG PWR SUPPLY MODULE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| FHS-22 | 制造商:TE Connectivity 功能描述: |
| FHS-24 | 制造商:TE Connectivity 功能描述: |
| FHS25610 | 制造商:n/a 功能描述:Ships in 2 days |
| FHS-256-10 | 制造商:PennEngineering (PEM) 功能描述: |
| FHS-256-12 | 制造商:PennEngineering (PEM) 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。