- 您現在的位置：買賣IC網 > PDF目錄375860 > FMM5820QH (SUMITOMO ELECTRIC DEVICE INNOVATIONS, INC.) Ka-Band Power Amplifier MMIC PDF資料下載
參數資料
| 型號： | FMM5820QH |
| 廠商： | SUMITOMO ELECTRIC DEVICE INNOVATIONS, INC. |
| 英文描述： | Ka-Band Power Amplifier MMIC |
| 中文描述： | Ka波段單片功率放大器 |
| 文件頁數： | 12/14頁 |
| 文件大小： | 380K |
| 代理商： | FMM5820QH |
12
Ka-Band Power Amplifier MMIC
■
Mounting Instructions for QH Package
FMM5820QH
(1) The package may be attached using screws. Torque conditions are shown in Table 1.
(2) First, tighten the screws with a torque driver set to 5 N-cm.
(3) The surface finish of the heat sink should be better than 0.8
μ
m, and the surface flatness
must be better than 10
μ
m.
(4) Silicon based heat sink compounds should not be used for the thermal conductive grease.
They cause poor grounding of the source flange, contamination and long term degradation
of thermal resistance between the MMIC package and the heat sink.
(5) The DC and RF interconnects may be gold bondwires or gold ribbons. The RF interconnects
should be as short as possible.
Package
Recommended
screw
M1.6*
Recommended
Torque
15 N-cm (1.3 lb-in)
Maximum Torque
QH
20 N-cm (1.8 lb-in)
Table 1. Recommended and Maximum Torque for Screw Mounting
*Mounting with flat washer is recommended.
相關PDF資料 |
PDF描述 |
|---|---|
| FMM5820X | Ka-Band Power Amplifier MMIC |
| FMM5822X | K-Band Power Amplifier MMIC |
| FMM5823X | K-Band Power Amplifier MMIC |
| FMM5826X | Ka-Band Power Amplifier MMIC |
| FMM5829X | K-Band Power Amplifier MMIC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| FMM5820X | 制造商:EUDYNA 制造商全稱:Eudyna Devices Inc 功能描述:Ka-Band Power Amplifier MMIC |
| FMM5822VU | 制造商:SUMITOMO ELECTRIC Device Innovations Inc 功能描述:C to Ka-Band, Power Amplifier MMIC, 17.7-19.7GHz, 32dBm, 1100mA, Bulk |
| FMM5822X | 制造商:EUDYNA 制造商全稱:Eudyna Devices Inc 功能描述:K-Band Power Amplifier MMIC |
| FMM5823X | 制造商:EUDYNA 制造商全稱:Eudyna Devices Inc 功能描述:K-Band Power Amplifier MMIC |
| FMM5826X | 制造商:EUDYNA 制造商全稱:Eudyna Devices Inc 功能描述:Ka-Band Power Amplifier MMIC |
發布緊急采購，3分鐘左右您將得到回復。