- 您現在的位置：買賣IC網 > PDF目錄375951 > FTR-B3GA012Z-B10 (Fujitsu Limited) MINIATURE RELAY 2-CONTA CT 1A (FOR SWITCHING SIGNALS) PDF資料下載
參數資料
| 型號： | FTR-B3GA012Z-B10 |
| 廠商： | Fujitsu Limited |
| 英文描述： | MINIATURE RELAY 2-CONTA CT 1A (FOR SWITCHING SIGNALS) |
| 中文描述： | 繼電器2的帳戶的CT 1A條（用于交換信號） |
| 文件頁數： | 10/11頁 |
| 文件大小： | 1110K |
| 代理商： | FTR-B3GA012Z-B10 |
10
Ftr-B3 series
roHs Compliance and Lead Free relay Information
Reflow Solder condtion
3. Moisture sensitivity
l
Moisture Sensitivity Level standard is not applicable to electromechanical realys.
4. tin Whisker
l
SnAgCu and SnCuNi solder is known as low risk of tin whisker. No considerable length whisker was found
by our in-house test.
We highly recommend that you confirm your actual solder conditions
Flow Solder condtion:
Pre-heating:
Soldering:
maximum 120C
dip within 5 sec. at
260C soler bath
Solder by Soldering Iron:
Soldering Iron
Temperature:
Duration:
maximum 360C
maximum 3 sec.
1. General Information
l
Relays produced after the specific date code that is indicated on each data sheet are lead-free
now. Most of our signal and power relays are lead-free. Please refer to Lead-Free Status Info.
(http://www.fujitsu.com/us/downloads/MICRO/fcai/relays/lead-free-letter.pdf)
l
Lead free solder paste currently used in relays is Sn-3.0Ag-0.5Cu. From February 2005 forward
Sn-3.0CU-Ni will be used for the FTR-B3 and FTR-B4 series relays.
l
All signal and most power relays also comply with RoHS. Please refer to individual data
sheets. Relays that are RoHS compliant do not contain the 5 hazardous materials that
are restricted by RoHS directive (lead, mercury, chromium IV, PBB, PBDE).
l
It has been verified that using lead-free relays in leaded assembly process will not cause any
problems (compatible).
l
“LF” is marked on each outer and inner carton. (No marking on individual relays).
l
To avoid leaded relays (for lead-free sample, etc.) please consult with area sales office.
l
We will ship leaded relays as long as the leaded relay inventory exists.
Note: Cadmium was exempted from RoHS on October 21, 2005. (Amendment to Directive 2002/95/EC)
2.
Recommended Lead Free Solder Profile
l
Recommended solder paste Sn-3.0Ag-0.5Cu amd Sm-3.0 Cu-Ni (only FTR-B3 and FTR-B4 from
February 2005.
max. 120 sec.
90~120 sec.
20~30 sec.
(duration)
Cooling
Pre-heating
Soldering
Peak
T
emp.: max. 250°C
250
220
130
170
t
相關PDF資料 |
PDF描述 |
|---|---|
| FTR-B3GA024Z-B10 | MINIATURE RELAY 2-CONTA CT 1A (FOR SWITCHING SIGNALS) |
| FTR-B3GA1.5Z-B10 | MINIATURE RELAY 2-CONTA CT 1A (FOR SWITCHING SIGNALS) |
| FTR-B3GA4.5Z-B10 | MINIATURE RELAY 2-CONTA CT 1A (FOR SWITCHING SIGNALS) |
| FTR-B3GB003Z-B10 | MINIATURE RELAY 2-CONTA CT 1A (FOR SWITCHING SIGNALS) |
| FTR-B3GB012Z-B10 | MINIATURE RELAY 2-CONTA CT 1A (FOR SWITCHING SIGNALS) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| FTR-B3GA012Z-B-10 | 制造商:FUJITSU 功能描述:Electromechanical Relay DPDT 2A 12VDC 1.028KOhm Surface Mount 制造商:Fujitsu 功能描述:Electromechanical Relay DPDT 2A 12VDC 1.028KOhm Surface Mount |
| FTR-B3GA012Z-RF | 制造商:FUJITSU 制造商全稱:Fujitsu Component Limited. 功能描述:ULTRA MINIATURE Flat High-Frequency Relay Surface mount, 1GHz-Band, 2 Form C |
| FTRB3GA012ZSPB10 | 制造商:TAKAMISAWA 功能描述: |
| FTR-B3GA024Z | 功能描述:低信號繼電器 - PCB SIGNAL RoHS:否 制造商:NEC 觸點形式:2 Form C (DPDT-BM) 觸點電流額定值: 線圈電壓:5 V 最大開關電流:1 A 線圈電流:1 A 線圈類型:Non-Latching 功耗:140 mW 端接類型:SMT 絕緣: 介入損耗: |
| FTR-B3GA024Z-B10 | 功能描述:低信號繼電器 - PCB SIGNAL RoHS:否 制造商:NEC 觸點形式:2 Form C (DPDT-BM) 觸點電流額定值: 線圈電壓:5 V 最大開關電流:1 A 線圈電流:1 A 線圈類型:Non-Latching 功耗:140 mW 端接類型:SMT 絕緣: 介入損耗: |
發布緊急采購，3分鐘左右您將得到回復。