- 您現在的位置：買賣IC網 > Datasheet目錄61 > GP1A073LCS0F (Sharp Microelectronics)PHOTOINTER OPIC SLOT 5MM W/CONN Datasheet資料下載
參數資料
| 型號： | GP1A073LCS0F |
| 廠商： | Sharp Microelectronics |
| 文件頁數： | 3/4頁 |
| 文件大小： | 0K |
| 描述： | PHOTOINTER OPIC SLOT 5MM W/CONN |
| 標準包裝： | 50 |
| 系列： | OPIC™ |
| 檢測距離： | 0.197"（5mm） |
| 檢測方法： | 可傳導的 |
| 輸出配置： | NPN - 開路集電極 |
| 安裝類型： | 卡入式 |
| 電流 - 電源： | 16.5mA |
| 電源電壓： | 2.7 V ~ 5.5 V |
| 封裝/外殼： | 模塊，連接器 |
| 其它名稱： | 425-1945-5 |
(Unit : mm)
1. It is recommended to mark the shear droop surface (punch side) of the mounting plate (metal plate) with "GP1A073LCS/HCS".
2. Mounting workability, shaking after mounting and mounting strength depend on the corner radius of the mounting plate and state of punching.
Determine the mounting dimensions after check on an actual machine.
3. General dimensional tolerances shall be ?.1mm.
I Recommended Mounting Hole Shape
GP1A073LCS/GP1A073HCS
7.7
7.5
8-R0.1
?.1
8-R0.1
?.1
Plate thickness : 1.6 mm
7.5
Plate thickness : 1.0 mm
Plate thickness : 1.2 mm
8-R0.1
?.1
General mounting type
7.7
7.5
Plate thickness : 1.6 mm
7.5
Plate thickness : 1.0 mm
Plate thickness : 1.2 mm
Reverse insertion
preventive type
12-R0.1
?.1
12-R0.1
?.1
12-R0.1
?.1
2.4
2.4
2.4
2.4
2.4
2.4
I Precautions for Operation
1. In this product, the PWB is fixed with a hook, and cleaning solvent may remain inside the case;
therefore, dip cleaning or ultrasonic cleaning are prohibited.
2. Remove dust or stains, using an air blower or a soft cloth moistened in cleaning solvent.
However, do not perform the above cleaning using a soft cloth with solvent in the marking portion.
In this case, use only the following type of cleaning solvent for wiping off;
Ethyl alcohol, Methyl alcohol, Isopropyl alcohol,
When the cleaning solvents except for specified materials are used, please contact us.
3. In order to stabilize power supply line, connect a by-pass capacitor of more than 0.01礔 between V
CC
and GND near the device.
G As for other general precautions, please refer to the chapter "Precautions for Use".
相關PDF資料 |
PDF描述 |
|---|---|
| GP1A50HRJ00F | PHOTOINTER OPIC SLOT 3.0MM PCB |
| GP1A51HRJ00F | PHOTOINTER OPIC SLOT 3.0MM PCB |
| GP1A52HRJ00F | PHOTOINTER OPIC SLOT 3.0MM PCB |
| GP1A52LRJ00F | PHOTOINTER OPIC SLOT 3.0MM PCB |
| GP1A53HRJ00F | PHOTOINTER OPIC SLOT 5.0MM PCB |
相關代理商/技術參數 |
參數描述 |
|---|---|
| GP1A08 | 制造商:SHARP 制造商全稱:Sharp Electrionic Components 功能描述:HIGH SENSITIVITY TYPE OPIC PHOTOINTERRUPTER |
| GP1A10 | 功能描述:PHOTOINTER OPIC SLOT 5MM W/CONN RoHS:否 類別:傳感器，轉換器 >> 光學 - 光斷續器 - 槽型 - 邏輯輸出 系列:OPIC™ 產品變化通告:Product Discontinuation 03/Dec/2009 標準包裝:50 系列:OPTOLOGIC® 檢測距離:0.197"（5mm） 檢測方法:可傳導的 輸出配置:NPN - 開路集電極，緩沖器 安裝類型:通孔 電流 - 電源:5mA 電源電壓:4.5 V ~ 16 V 響應時間:70ns 封裝/外殼:PCB 安裝 |
| GP1A101C2KSF | 功能描述:光學開關（透射型，光電IC輸出） 360 LPI Dgtl w/encdr Transmissive 1.7mm RoHS:否 制造商:Optek 輸出設備:Totem Pole, Buffer 槽寬:3.18 mm 光圈寬度:1.27 mm 正向電流:40 mA 最大工作溫度:+ 70 C 最小工作溫度:- 40 C 封裝: |
| GP1A13R | 制造商:Sharp Microelectronics Corporation 功能描述: |
| GP1A14 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。