- 您現在的位置：買賣IC網 > PDF目錄385311 > GS1535ACFUE3 (Gennum Corporation) GS1535A / GS9065A HD-LINX-R II Multi-Rate SDI Automatic Reclocker PDF資料下載
參數資料
| 型號： | GS1535ACFUE3 |
| 廠商： | Gennum Corporation |
| 英文描述： | GS1535A / GS9065A HD-LINX-R II Multi-Rate SDI Automatic Reclocker |
| 中文描述： | GS1535A / GS9065A的HD - LINX進程- R的第二多速率SDI自動時鐘恢復器 |
| 文件頁數： | 21/27頁 |
| 文件大小： | 345K |
| 代理商： | GS1535ACFUE3 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁當前第21頁第22頁第23頁第24頁第25頁第26頁第27頁
GS1535A / GS9065A Data Sheet
31497 - 3
November 2005
21 of 27
In Manual mode, the SS[2:0] pins become inputs and the data rate can be
programmed by the application layer. In this mode, the search algorithm is disabled
and the PLL will only lock to the data rate selected.
Table 4-2
shows the SS[2:0] pin settings for either the data rate selected (in
Manual mode) or the data rate that the PLL has locked to (in Auto mode).
4.8 Bypass Mode
In Bypass mode, the GS1535A/9065A passes the data at the inputs directly to the
outputs. There are two pins that control the bypass function: BYPASS and
AUTOBYPASS.
When BYPASS is set HIGH by the application layer, the GS1535A/9065A will be
in Bypass mode.
When AUTOBYPASS is set HIGH by the application layer, the GS1535A/9065A
will be configured to enter Bypass mode only when the PLL has not locked to a data
rate. When BYPASS is set HIGH, AUTOBYPASS will be ignored.
When the PLL is not locked, and both BYPASS and AUTOBYPASS are set LOW,
the serial digital output DDO/DDO will produce invalid data.
4.9 DVB-ASI Operation
The GS1535A/9065A will also re-clock DVB-ASI at 270 Mb/s. When reclocking
DVB-ASI data set the ASI/177 pin HIGH to prevent a false lock to 177Mb/s. If
ASI/177 is not set HIGH, a false lock may occur since there is a harmonic present
in idle patterns (K28.5) which is very close the 177 Mb/s data rate (EIC 1179). Note
that setting the ASI/177 pin HIGH will disable the 177 Mb/s search when the device
is in Auto mode, consequently the GS1535A/9065A will not lock to that data rate.
Table 4-2: Data Rate Indication/Selection Bit Pattern
SS[2:0]
Data Rate (Mb/s)
000
143
001
177
010
270
011
360
100
540
101*
1485/1483.5
* This setting only applies to the GS1535A. For the GS9065A, when AUTO/MAN is LOW, the pin
settings SS[0:2] = 101 will be ignored by the device.
相關PDF資料 |
PDF描述 |
|---|---|
| GS9065A | GS1535A / GS9065A HD-LINX-R II Multi-Rate SDI Automatic Reclocker |
| GS9065ACFUE3 | GS1535A / GS9065A HD-LINX-R II Multi-Rate SDI Automatic Reclocker |
| GS1559 | GS1559 HD-LINX-TM II Multi-Rate Deserializer with Loop-Through Cable Driver |
| GS1559-CB | GS1559 HD-LINX-TM II Multi-Rate Deserializer with Loop-Through Cable Driver |
| GS1559-CBE2 | GS1559 HD-LINX-TM II Multi-Rate Deserializer with Loop-Through Cable Driver |
相關代理商/技術參數 |
參數描述 |
|---|---|
| GS1535BCFUE3 | 制造商:Gennum Corporation 功能描述:IC RELOCKER HD/SD/ASI 64LQFP 制造商:Gennum Corporation 功能描述:IC, RELOCKER, HD/SD/ASI, 64LQFP 制造商:Gennum Corporation 功能描述:IC, RELOCKER, HD/SD/ASI, 64LQFP; Supply Voltage Min:3.135V; Supply Voltage Max:3.465V; Digital IC Case Style:LQFP; No. of Pins:64; Operating Temperature Min:0C; Operating Temperature Max:70C; MSL:MSL 3 - 168 hours; SVHC:No SVHC |
| GS1535-CFU | 制造商:Rochester Electronics LLC 功能描述: 制造商:Gennum Corporation 功能描述: |
| GS1535-CFUE3 | 制造商:Gennum Corporation 功能描述:Automatic Reclocker 64-Pin LQFP |
| GS-154 | 制造商:Taiyo Electric Ind. 功能描述: |
| GS1540 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:HDTV Serial Digital Non-Equalizing Receiver |
發布緊急采購，3分鐘左右您將得到回復。