- 您現在的位置：買賣IC網 > PDF目錄385342 > GS881Z36T-11 (GSI TECHNOLOGY) 8Mb Pipelined and Flow Through Synchronous NBT SRAMs PDF資料下載
參數資料
| 型號： | GS881Z36T-11 |
| 廠商： | GSI TECHNOLOGY |
| 元件分類： | DRAM |
| 英文描述： | 8Mb Pipelined and Flow Through Synchronous NBT SRAMs |
| 中文描述： | 256K X 36 ZBT SRAM, 11 ns, PQFP100 |
| 封裝： | TQFP-100 |
| 文件頁數： | 12/34頁 |
| 文件大小： | 542K |
| 代理商： | GS881Z36T-11 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁當前第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁
Rev: 1.10 8/2000
Specifications cited are subject to change without notice. For latest documentation see http://www.gsitechnology.com
12/34
1998, Giga Semconductor, Inc.
Preliminary
.
GS881Z18/36T-11/100/80/66
Burst Cycles
Although NBT RAMs are designed to sustain 100% bus bandwidth by eliminating turnaround cycle when there is transition from
read to write, multiple back-to-back reads or writes may also be performed. NBT SRAMs provide an on-chip burst address
generator that can be utilized, if desired, to further simplify burst read or write implementations. The ADV control pin, when
driven high, commands the SRAM to advance the internal address counter and use the counter generated address to read or write
the SRAM. The starting address for the first cycle in a burst cycle series is loaded into the SRAM by driving the ADV pin low, into
Load mode.
Burst Order
The burst address counter wraps around to its initial state after four addresses (the loaded address and three more) have been
accessed. The burst sequence is determined by the state of the Linear Burst Order pin (LBO). When this pin is Low, a linear burst
sequence is selected. When the RAM is installed with the LBO pin tied high, Interleaved burst sequence is selected. See the tables
below for details.
Mode Pin Functions
Note:
There are pull-up devices on the LBO, DP and FT pins and a pull down device on the ZZ pin, so those input pins can be unconnected and the
chip will operate in the default states as specified in the above table.
Burst Counter Sequences
Linear Burst Sequence
BPR 1999.05.18
Sleep Mode
During normal operation, ZZ must be pulled low, either by the user or by its internal pull down resistor. When ZZ is pulled high,
the SRAM will enter a Power Sleep mode after 2 cycles. At this time, internal state of the SRAM is preserved. When ZZ returns to
low, the SRAM operates normally after 2 cycles of wake up time.
Mode Name
Pin Name
State
L
H or NC
L
H or NC
L or NC
Function
Linear Burst
Interleaved Burst
Flow Through
Pipeline
Active
Standby, I
DD
= I
SB
Check for Odd Parity
Check for Even Parity
Burst Order Control
LBO
Output Register Control
FT
Power Down Control
ZZ
H
ByteSafe Data Parity Control
DP
L
H or NC
Note: The burst counter wraps to initial state on the 5th clock.
I
nterleaved Burst Sequence
Note: The burst counter wraps to initial state on the 5th clock.
A[1:0]
A[1:0]
A[1:0]
A[1:0]
1st address
00
01
10
11
2nd address
01
10
11
00
3rd address
10
11
00
01
4th address
11
00
01
10
A[1:0]
A[1:0]
A[1:0]
A[1:0]
1st address
00
01
10
11
2nd address
01
00
11
10
3rd address
10
11
00
01
4th address
11
10
01
00
相關PDF資料 |
PDF描述 |
|---|---|
| GS881Z36T-11I | 8Mb Pipelined and Flow Through Synchronous NBT SRAMs |
| GS881Z36T-66 | 8Mb Pipelined and Flow Through Synchronous NBT SRAMs |
| GS881Z36T-66I | 8Mb Pipelined and Flow Through Synchronous NBT SRAMs |
| GS881Z36T-80 | 8Mb Pipelined and Flow Through Synchronous NBT SRAMs |
| GS881Z36T-80I | 8Mb Pipelined and Flow Through Synchronous NBT SRAMs |
相關代理商/技術參數 |
參數描述 |
|---|---|
| GS881Z36T-11I | 制造商:GSI 制造商全稱:GSI Technology 功能描述:8Mb Pipelined and Flow Through Synchronous NBT SRAMs |
| GS881Z36T-66 | 制造商:GSI 制造商全稱:GSI Technology 功能描述:8Mb Pipelined and Flow Through Synchronous NBT SRAMs |
| GS881Z36T-66I | 制造商:GSI 制造商全稱:GSI Technology 功能描述:8Mb Pipelined and Flow Through Synchronous NBT SRAMs |
| GS881Z36T-80 | 制造商:GSI 制造商全稱:GSI Technology 功能描述:8Mb Pipelined and Flow Through Synchronous NBT SRAMs |
| GS881Z36T-80I | 制造商:GSI 制造商全稱:GSI Technology 功能描述:8Mb Pipelined and Flow Through Synchronous NBT SRAMs |
發布緊急采購，3分鐘左右您將得到回復。