- 您現在的位置：買賣IC網 > PDF目錄385346 > GTL2010BS (NXP SEMICONDUCTORS) 10-bit bidirectional low voltage translator PDF資料下載
參數資料
| 型號： | GTL2010BS |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 其它接口 |
| 英文描述： | 10-bit bidirectional low voltage translator |
| 中文描述： | SPECIALTY INTERFACE CIRCUIT, DSO24 |
| 封裝： | 4 X 4 MM, 0.85 MM HEIGHT, PLASTIC, MO-220, SOT-616-1, HVQFN-24 |
| 文件頁數： | 15/20頁 |
| 文件大小： | 117K |
| 代理商： | GTL2010BS |
GTL2010_6
NXP B.V. 2008. All rights reserved.
Product data sheet
Rev. 06 — 3 March 2008
15 of 20
NXP Semiconductors
GTL2010
10-bit bidirectional low voltage translator
15. Soldering of SMD packages
This text provides a very brief insight into a complex technology. A more in-depth account
of soldering ICs can be found in Application Note AN10365 “Surface mount reflow
soldering description”
15.1 Introduction to soldering
Soldering is one of the most common methods through which packages are attached to
Printed Circuit Boards (PCBs), to form electrical circuits. The soldered joint provides both
the mechanical and the electrical connection. There is no single soldering method that is
ideal for all IC packages. Wave soldering is often preferred when through-hole and
Surface Mount Devices (SMDs) are mixed on one printed wiring board; however, it is not
suitable for fine pitch SMDs. Reflow soldering is ideal for the small pitches and high
densities that come with increased miniaturization.
15.2 Wave and reflow soldering
Wave soldering is a joining technology in which the joints are made by solder coming from
a standing wave of liquid solder. The wave soldering process is suitable for the following:
Through-hole components
Leaded or leadless SMDs, which are glued to the surface of the printed circuit board
Not all SMDs can be wave soldered. Packages with solder balls, and some leadless
packages which have solder lands underneath the body, cannot be wave soldered. Also,
leaded SMDs with leads having a pitch smaller than ~0.6 mm cannot be wave soldered,
due to an increased probability of bridging.
The reflow soldering process involves applying solder paste to a board, followed by
component placement and exposure to a temperature profile. Leaded packages,
packages with solder balls, and leadless packages are all reflow solderable.
Key characteristics in both wave and reflow soldering are:
Board specifications, including the board finish, solder masks and vias
Package footprints, including solder thieves and orientation
The moisture sensitivity level of the packages
Package placement
Inspection and repair
Lead-free soldering versus SnPb soldering
15.3 Wave soldering
Key characteristics in wave soldering are:
Process issues, such as application of adhesive and flux, clinching of leads, board
transport, the solder wave parameters, and the time during which components are
exposed to the wave
Solder bath specifications, including temperature and impurities
相關PDF資料 |
PDF描述 |
|---|---|
| GTL2010PW | 10-bit bidirectional low voltage translator |
| GTL2012DP | 2-bit LVTTL to GTL transceiver |
| GTL2014PW | 4-bit LVTTL to GTL transceiver |
| GTL2018PW | 8-bit LVTTL to GTL transceiver |
| GTL2034PW | 4-bit GTL to GTL buffer |
相關代理商/技術參數 |
參數描述 |
|---|---|
| GTL2010BS,118 | 功能描述:轉換 - 電壓電平 VOLT TRANSLATOR RoHS:否 制造商:Micrel 類型:CML/LVDS/LVPECL to LVCMOS/LVTTL 傳播延遲時間:1.9 ns 電源電流:14 mA 電源電壓-最大:3.6 V 電源電壓-最小:3 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:MLF-8 |
| GTL2010BS-T | 制造商:PHILIPS 制造商全稱:NXP Semiconductors 功能描述:NXP bidirectional low-voltage translators |
| GTL2010DB | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:VOLTAGE CLAMP|MOS|TSSOP|24PIN|PLASTIC |
| GTL2010PW | 制造商:NXP Semiconductors 功能描述:IC GTL LO-VOLT TRANSLATOR 24 制造商:NXP Semiconductors 功能描述:IC, GTL LO-VOLT TRANSLATOR, 24TSSOP 制造商:NXP Semiconductors 功能描述:IC, GTL LO-VOLT TRANSLATOR, 24TSSOP; No. of Inputs:10; Propagation Delay:250ps; Supply Voltage Min:2.3V; Supply Voltage Max:2.7V; Logic Case Style:TSSOP; No. of Pins:24; Logic Type:Bidirectional Low Voltage Translator; Operating ;RoHS Compliant: Yes 制造商:NXP Semiconductors 功能描述:Voltage Level Translator GTL/GTL+ to LVTTL/TTL 24-Pin TSSOP Tube |
| GTL2010PW,112 | 功能描述:轉換 - 電壓電平 1-BIT GTL VOLTAGE CLAMP TRANS RoHS:否 制造商:Micrel 類型:CML/LVDS/LVPECL to LVCMOS/LVTTL 傳播延遲時間:1.9 ns 電源電流:14 mA 電源電壓-最大:3.6 V 電源電壓-最小:3 V 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:MLF-8 |
發布緊急采購，3分鐘左右您將得到回復。