- 您現在的位置：買賣IC網 > PDF目錄384391 > HBS2PBA2SP041C (ITT Corporation) Single Pole Standard Precision Snap-acting Switches PDF資料下載
參數資料
| 型號： | HBS2PBA2SP041C |
| 廠商： | ITT Corporation |
| 英文描述： | Single Pole Standard Precision Snap-acting Switches |
| 中文描述： | 單刀標準精度扣開關作用 |
| 文件頁數： | 1/7頁 |
| 文件大小： | 280K |
| 代理商： | HBS2PBA2SP041C |
K
S
K–37
Dimensions are shown: Inch (mm)
Specifications and dimensions subject to change
www.ittcannon.com
C&K HB Series
Single Pole Standard Precision Snap-acting Switches
Models Available
Features/Benefits
Low differential travel, high repeatability
Long life—150,000 cycles typical
Single and double pole circuitry
Sealed actuator and case
Typical Applications
Thermostats
Motors
Industrial controls
Specifications
CONTACT RATING: From low level* to 20 AMPS @ 480 V AC;
see ELECTRICAL RATING option section for complete listings.
ELECTRICAL LIFE: 150,000 cycles at 20 AMPS @ 250 V AC.
consult Customer Service Center for typical life at other ratings.
INSULATION RESISTANCE: 1,000 M ohm min.
DIELECTRIC STRENGTH: 1,500 Vrms min. @ sea level.
OPERATING TEMPERATURE: –67oF to 302oF (–55oC to 150oC).
OPERATING FORCE: From 4 oz. to 26 oz. max. at actuator
button available.
MOUNTING SCREWS: Torque 3 in/lbs max.
(Note: Exceeding 3 in/lbs torque may change operating
characteristics and increase the possibility of cracking
switch case).
TERMINAL SCREWS: Torque 4 in/lbs max.
PANEL MOUNTING BUSHING: Torque 4-6 in/lbs max.
DEGREE OF PROTECTION: IP65; Dust-proof, water splash and
dew condensation.
* Low Level=conditions where no arcing occurs during switching, i.e., 0.4 VA max. @
20 V AC or DC max.
Materials
SWITCH HOUSING: Heat resistant/electrical grade phenolic.
INSERTS: Brass alloy.
ACTUATOR BUTTON: Moisture resistant phenolic.
SPRING: Copper alloy.
PIVOT: Brass alloy.
MOVABLE CONTACTS: Gold alloy for ratings 1 AMP or less.
Fine silver for ratings greater than 1 AMP and motor load
ratings less than 1/2 HP @ 125 V AC. Precious metal alloy
for motor load ratings 1/2 HP @ 125 V AC or greater.
STATIONARY CONTACTS: Gold alloy for ratings 1 AMP or less.
Fine silver welded to copper base for ratings greater than
1 AMP and motor load ratings less than 1/2 HP @ 125 V AC.
Precious metal alloy on copper base for motor load
ratings 1/2 HP @ 125 V AC or greater.
TERMINALS: Brass alloy, bright tin plated.
NOTE:
For the latest information regarding RoHS compliance, please go
to: www.ittcannon.com/rohs.
NOTE:
Specifications and materials listed above are for switches with standard options.
For information on specific and custom switches, consult Customer Service Center.
Build-A-Switch
To order, simply select desired option from each category and place in the appropriate box. Available options are shown and
described on pages K-38 thru K-43. For additional options not shown in catalog, consult Customer Service Center.
H
B
Series
HB
Precision Snap-acting Switches
Operating Force
KG
18 oz./510 grams
GF
4 oz./113 grams
KA
9 oz./255 grams
KC
13 oz./368 grams
KH
20 oz./567 grams
PB
26 oz./737 grams
Contact Separation
2
.020"
1
.010"
4
.040"
7
.070"
Electrical Rating
B4
20 A, 125, 250, 480 V AC;
0.25 A, 250 V DC; 0.5 A, 125 V DC
A2
5 A, 125, 250 V AC
B6
20 A, 125, 250, 480 V AC; 0.25 A,
250 V DC; 0.5 A, 125 V DC; 3/4 HP,
125 V AC; 1 1/2 HP, 25O V AC
F5
1 A,125 V AC; 1 A, 3O V DC
F9
22 A, 125, 277 V AC; 15 A, 480 V AC;
1/4 HP, 125 V AC; 1/2 HP, 250 V AC
X3
20 A, 125, 250, 480 V AC; 0.25 A,
250 V DC; 0.5 A, 125 V DC; 15(10) A,
380 V~ 185
+++
μ (VDE)
Actuator
P0
Pin plunger
A0
Lever roller
D0
Stub plunger
F0
Reverse acting lever roller
J0
High overtravel plunger
R5
Perpendicular roller plunger
T0
Lever
TS
Sealed Lever
Y0
Reverse acting lever
Terminations
11
Flat base, solder, 4-40 screws
41
Flat base, .250" quick connect
55
Step base, cup washers, 6-32 screws
Circuitry
C
SPDT
Mounting Style
S
Standard
S
Function
S
SP
S
C
相關PDF資料 |
PDF描述 |
|---|---|
| HBS2PBA2SP055C | Single Pole Standard Precision Snap-acting Switches |
| HBS2PBB4SA011C | Single Pole Standard Precision Snap-acting Switches |
| HBS2PBB4SA041C | Single Pole Standard Precision Snap-acting Switches |
| HBS2PBB4SA055C | Single Pole Standard Precision Snap-acting Switches |
| HBS2PBB4SP011C | Single Pole Standard Precision Snap-acting Switches |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HBS2PBA2SP055C | 制造商:ITT 制造商全稱:ITT Industries 功能描述:Single Pole Standard Precision Snap-acting Switches |
| HBS2PBB4SA011C | 制造商:ITT 制造商全稱:ITT Industries 功能描述:Single Pole Standard Precision Snap-acting Switches |
| HBS2PBB4SA041C | 制造商:ITT 制造商全稱:ITT Industries 功能描述:Single Pole Standard Precision Snap-acting Switches |
| HBS2PBB4SA055C | 制造商:ITT 制造商全稱:ITT Industries 功能描述:Single Pole Standard Precision Snap-acting Switches |
| HBS2PBB4SP011C | 制造商:ITT 制造商全稱:ITT Industries 功能描述:Single Pole Standard Precision Snap-acting Switches |
發布緊急采購，3分鐘左右您將得到回復。