
16
Couplers with Connectors (H Type)
HDH Series
I
Features
1.High Performance
The high frequency characteristics feature
extremely low loss, a high degree of matching, and
high isolation.
2.Power Uniform Distribution and
90Phase Difference Type
This is a one input, two output (or two input, one
output) power uniform distribution type having a
90
phase difference between the two outputs (or
two inputs).
3.Miniature and Lightweight
Corrosion-resistant aluminum is used for the case
and the Hirose Electric original pattern design,
which uses a stripline triplate method, enables the
couplers to be miniature and lightweight.
4.Couplers with SMA Connectors
Use of SMA connectors (Hirose Electric HRM
Series) which feature stainless steel for the exterior
cladding make these couplers durable.
I
Product Specifications
Note: The frequency range and the maximum input power will differ depending on the products.
G
The test method conforms to MIL-STD-202.
I
Materials
Ratings
Frequency range (Note)
Characteristic impedance
Maximum Input Power (Note)
0.5 to 14.5 GHz
50
ohms
2 to 50 W
Operating temperature range
Operating relative humidity
-10
to +65
95% Max.
Item
Standard
Conditions
1.Contact resistance 4 m
ohms
max
.
2.
Insulation resistance
1000 M
ohms
min
.
1 A
100 V DC
3.Vibration
Frequency of 10 to 2000 Hz, overall amplitude of 1.52 mm,
acceleration of 98 m/s
2
for 2 hours in each of 3 directions
Acceleration of 980 m/s
2
, sine half-wave waveform,
3 cycles in each of the 3 axis
4.Shock
5.Temperature cycle No damage, cracks, or parts dislocation
Connector Body
Stainless steel
Beryllium copper
PTFE
Aluminum
Dielectric
Passivated
Gold plating
---------
Connector female contacts
Connector Insulator
Case
Board
---------
Gold plating
Part
Material
Finish
HDH-00803GHD
HDH-01503GHD
HDH-01503GH
HDH-03003GHD
HDH-06003GHD
HDH-09003GHD
HDH-12803CHD
Temperature : -55
+5
to +35
+85
+5
to +35
Time : 30
15 max.
30
15 max. (Minutes)
200 cycles
No electrical discontinuity of 1
μ
s or more
No damage, cracks, or parts dislocation