- 您現在的位置：買賣IC網 > PDF目錄370499 > HDMP-1022 Audio Power Amplifier; Speaker Channels:Mono; Headphone Channels:Mono; Output Power, Po:2W; Load Impedance Min:8ohm; Supply Voltage Max:24V; Supply Voltage Min:6V PDF資料下載
參數資料
| 型號： | HDMP-1022 |
| 英文描述： | Audio Power Amplifier; Speaker Channels:Mono; Headphone Channels:Mono; Output Power, Po:2W; Load Impedance Min:8ohm; Supply Voltage Max:24V; Supply Voltage Min:6V |
| 中文描述： | 低成本千兆速率發送/接收芯片組配備TTL的I / O |
| 文件頁數： | 1/40頁 |
| 文件大小： | 321K |
| 代理商： | HDMP-1022 |
當前第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁第28頁第29頁第30頁第31頁第32頁第33頁第34頁第35頁第36頁第37頁第38頁第39頁第40頁
615
Low Cost Gigabit Rate
Transmit/Receive Chip Set with
TTL I/Os
Preliminary Technical Data
Features
Transparent, Extended
Ribbon Cable Replacement
Implemented in a Low Cost
Aluminum M-Quad 80
Package
High-Speed Serial Rate
150-1500 MBaud
Standard TTL Interface
16, 17, 20, or 21 Bits Wide
Reliable Monolithic Silicon
Bipolar Implementation
On-Chip Phase-Locked
Loops
- Transmit Clock Generation
- Receive Clock Extraction
Applications
Backplane/Bus Extender
Video, Image Acquisition
Point to Point Data Links
Implement SCI-FI Standard
Implement Serial HIPPI
Specification
data. Parallel data (a frame)
loaded into the Tx (transmitter)
chip is delivered to the Rx
(receiver) chip over a serial
channel, which can be either a
coaxial copper cable or optical
link.
The chip set hides from the user
all the complexity of encoding,
multiplexing, clock extraction,
demultiplexing and decoding.
Unlike other links, the phase-
locked-loop clock extraction
circuit also transparently provides
for frame synchronization–the
user is not troubled with the
periodic insertion of frame syn-
chronization words. In addition,
the dc balance of the line code is
automatically maintained by the
chip set. Thus, the user can
transmit arbitrary data without
restriction. The Rx chip also
includes a state-machine con-
troller (SMC) that provides a
startup handshake protocol for
the duplex link configuration.
The serial data rate of the T/R link
is selectable in four ranges (see
tables on page 5), and extends
from 120 Mbits/s up to 1.25
Gbits/s. The parallel data interface
is 16 or 20 bit TTL, pin select-
able. A flag bit is available and
can be used as an extra 17th or
21st bit under the user’s control.
The flag bit can also be used as an
even or odd frame indicator for
dual-frame transmission. If not
used, the link performs expanded
error detection.
The serial link is synchronous,
and both frame synchronization
and bit synchronization are main-
tained. When data is not available
to send, the link maintains
synchronization by transmitting
fill frames. Two (training) fill
frames are reserved for
handshaking during link startup.
User control space is also sup-
ported. If Control Available is
asserted at the Tx chip, the least
significant 14 or 18 bits of the
data are sent and the Rx Control
Available line will indicate the
data as a Control Word.
It is the intention of this data
sheet to provide the design
engineer all of the information
regarding the HDMP-1022/1024
chipset necessary to design this
product into their application. To
assist you in using this data sheet,
the following Table of Contents is
provided.
HDMP-1022 Transmitter
HDMP-1024 Receiver
Description
The HDMP-1022 transmitter and
the HDMP-1024 receiver are used
to build a high-speed data link for
point-to-point communication.
The monolithic silicon bipolar
transmitter chip and receiver chip
are each provided in a standard
aluminum M-Quad 80 package.
From the user’s viewpoint, these
products can be thought of as
providing a “virtual ribbon cable”
interface for the transmission of
(5/97)
相關PDF資料 |
PDF描述 |
|---|---|
| HDMP-1024 | Low Cost Gigabit Rate Receive Chip Set with TTL I/Os(帶TTL輸入/輸出的低價格千兆位速率接收芯片) |
| HDMP-1032 | 1.4 GBd Transmitter Chip Set with CIMT Encoder/Decoder and Variable Data Rate(帶CIMT編碼器/譯碼器和變量數據速率的1.4 GBd 傳送器) |
| HDMP-1034 | 1.4 GBd Receiver Chip Set with CIMT Encoder/Decoder and Variable Data Rate(帶CIMT編碼器/譯碼器和變量數據速率的1.4 GBd 接收器) |
| HDMP-1512 | Fibre Channel Transmitter Chipset(光纖通道傳送芯片) |
| HDMP-1514 | Fibre Channel Receiver Chipset(光纖通道接收芯片) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HDMP-1024 | 制造商:AGILENT 制造商全稱:AGILENT 功能描述:Low Cost Gigabit Rate Transmit/Receive Chip Set with TTL I/Os |
| HDMP-1032 | 制造商:AGILENT 制造商全稱:AGILENT 功能描述:1.4 GBd Transmitter/Receiver Chip Set with CIMT Encoder/Decoder and Variable Data Rate |
| HDMP-1032A | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:1.4 GBd Transmitter Chip with CIMT Encoder/Decoder and Variable Data Rate |
| HDMP-1034 | 制造商:AGILENT 制造商全稱:AGILENT 功能描述:1.4 GBd Transmitter/Receiver Chip Set with CIMT Encoder/Decoder and Variable Data Rate |
| HDMP-1034A | 制造商:HP 制造商全稱:Agilent(Hewlett-Packard) 功能描述:Transmitter/Receiver Chip Set |
發布緊急采購，3分鐘左右您將得到回復。