- 您現在的位置：買賣IC網 > PDF目錄370574 > HFBR-0300 1300 nm Fiber Optic Transmitter and Receiver(1300 nm 光纖傳送器和接收器) PDF資料下載
參數資料
| 型號： | HFBR-0300 |
| 英文描述： | 1300 nm Fiber Optic Transmitter and Receiver(1300 nm 光纖傳送器和接收器) |
| 中文描述： | 1300納米光纖發射器和接收器（1300納米光纖傳送器和接收器） |
| 文件頁數： | 1/8頁 |
| 文件大小： | 98K |
| 代理商： | HFBR-0300 |
1300 nm Fiber Optic
Transmitter and Receiver
Technical Data
Features
Low Cost Fiber Optic Link
Signal Rates over 155
Megabaud
1300 nm Wavelength
Link Distances over 5 km
Dual-in-line Package Panel-
Mountable ST* and SC
Connector Receptacles
Auto-Insertable and Wave-
Solderable
Specified with 62.5/125
μ
m
and 50/125
μ
m Fiber
Compatible with HFBR-0400
Series
Applications
Desktop Links for High
Speed LANs
Distance Extension Links
Telecom Switch Systems
TAXlchip
Compatible
Description
The HFBR-0300 Series is
designed to provide the most
cost-effective 1300 nm fiber optic
links for a wide variety of data
communication applications from
low-speed distance extenders up
to SONET OC-3 signal rates.
Pinouts identical to Hewlett-
Packard HFBR-0400 Series allow
designers to easily upgrade their
820 nm links for farther distance.
The transmitter and receiver are
compatible with two popular
optical fiber sizes: 50/125
μ
m and
62.5/125
μ
m diameter. This
allows flexibility in choosing a
fiber size. The 1300 nm wave-
length is in the lower dispersion
and attenuation region of fiber,
and provides longer distance
capabilities than 820 nm LED
technology. Typical distance
capabilities are 2 km at 125 MBd
and 5 km at 32 MBd.
Transmitter
The HFBR-1312T fiber optic
transmitter contains a 1300 nm
InGaAsP light emitting diode
capable of efficiently launching
optical power into 50/125
μ
m and
62.5/125
μ
m diameter fiber.
Converting the interface circuit
from a HFBR-14XX 820 nm
transmitter to the HFBR-1312T
requires only the removal of a few
passive components.
Receiver
The HFBR-2316T receiver con-
tains an InGaAs PIN photodiode
and a low-noise transimpedance
preamplifier that operate in the
1300 nm wavelength region. The
HFBR-2316T receives an optical
signal and converts it to an analog
voltage. The buffered output is an
emitter-follower, with frequency
response from DC to typically 125
MHz. Low-cost external compo-
nents can be used to convert the
analog output to logic compatible
signal levels for a variety of data
formats and data rates. The
*ST is a registered trademark of AT&T Lightguide Cable Connectors
HFBR-0300 Series:
HFBR-1312T Transmitter
HFBR-2316T Receiver
相關PDF資料 |
PDF描述 |
|---|---|
| HFBR-0305 | 1300 nm E-LED Transmitter and PIN/Preamp Receiver for Single-Mode Fiber(1300 nm 應用于單模式的E-LED傳送器和PIN/前置放大器接收器) |
| HFBR-0400 | Low Cost, Miniature Fiber Optic Components with ST， SMA, SC and FC Ports(帶ST，SMA, SC 和 FC端口的低價格，微型光纖元件) |
| HFBR-0600 | SERCOS Fiber Optic Transmitters and Receiver |
| HFBR-1115T | Fiber Optic Transmitter Data Links for 125 MBd(應用于125 MBd的光纖傳送數據鏈路) |
| HFBR-1116T | Fiber Optic Transmitter Data Links for 155 MBd(應用于155 MBd的光纖傳送數據鏈路) |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HFBR-0305 | 制造商:64080 功能描述:FIBRE OPTICS, FIBRE OPTIC: K |
| HFBR-0310 | 功能描述:光學纖維開發工具 155 MBd Txcvr Evaluation Kit RoHS:否 制造商:Omron Electronics 產品:Evaluation Boards 用于:SX51 封裝: |
| HFBR-0310Z | 功能描述:光學纖維開發工具 125MBd 1300nm Evaluation Kit RoHS:否 制造商:Omron Electronics 產品:Evaluation Boards 用于:SX51 封裝: |
| HFBR-0319 | 功能描述:光學纖維開發工具 1X9 Fiber Optic Evaluation Kit RoHS:否 制造商:Omron Electronics 產品:Evaluation Boards 用于:SX51 封裝: |
| HFBR-0319 | 制造商:Avago Technologies 功能描述:Evaluation test fixture board |
發布緊急采購，3分鐘左右您將得到回復。