
B15
Ribbon Cable connector Compliant with MIL Standard
HIF3B Series
I
Features
1. Product Compliant with MIL Standard
HIF3B series has been developed as a product compliant with MIL
standard, and used for wide applications.
2. UL Approval Product
HIF3B series connectors are UL approved.
3. Mechanism to Prevent Mis-insertion
This connector is equipped with the mechanism to prevent Mis-
insertion as follows.
1
The system provides the convex area to insert the guide-key on the
pin header side, and to guide it in combination with the socket
convex area (MIL standard).
2
The system embeds and guides the polarizing key in the socket holes.
4. Applicable Cable AWG#28
The applicable cable is UL2651 AWG#28 flat cable (7 cores./
0.127mm, jacket dia. 0.9
±
0.1mm).
I
Product Specifications
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Rating
Current rating : 1A
Voltage rating : 200V AC Operating Moisture Range : 40
to
80
%
Operating Temperature Range
:
–
55
to +
85
(Note 1)
Storage Temperature Range :
–
10
to +
60
(Note 2)
Storage Humidity Range : 40
to
70% (Note 2)
Item
Specification
Condition
1. Insulation Resistance
2. Withstanding voltage
3. Contact Resistance
4.
Vibration
5.
Humidity (Steady state)
Insulation resistance: 1000M
ohms
min.
1000M
ohms
min.
No flashover or insulation breakdown.
15m
ohms
max.
No electrical discontinuity of 1μs or more
500V DC
650V AC/1 minute
0.1A
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
96 hours at temperature of 40 and humidity of 90% to 95%
(-65
: 30 minutes
15
to
35
: 5 minutes max.
6. Temperature Cycle
No damage, cracks, or parts looseness.
125
: 30 minutes
15
to
35
: 5 minutes max.) 5 cycles
500 cycles
Flow: 260 for 10 seconds
Manual soldering: 300 for 3 seconds
7.
Durability (Mating/un-mating)
Contact resistance: 15m
ohms
max.
8.
Resistance to Soldering heat
No deformation of components affecting performance.
I
Material
Part
Material
PBT
Finish
Black
Remarks
UL94V-0
Insulator
D
Beryllium copper
Connection area
Connection area
Connection area
Connection area
Gold plated
Gold plated
Gold plated
Tin lead plated
Socket Contact
–––––––
DA
Copper alloy
Pin header contact
Brass
Selective Gold plated
–––––––