
1
FN
4325.1
HIP6013
Buck Pulse-Width Modulator (PWM)
Controller
The HIP6013 provides complete control and protection for a
DC-DC converter optimized for high-performance
microprocessor applications. It is designed to drive an
N-Channel MOSFET in a standard buck topology. The
HIP6013 integrates all of the control, output adjustment,
monitoring and protection functions into a single package.
The output voltage of the converter can be precisely
regulated to as low as 1.27V, with a maximum tolerance of
±
1.5% over temperature and line voltage variations.
The HIP6013 provides simple, single feedback loop, voltage-
mode control with fast transient response. It includes a
200kHz free-running triangle-wave oscillator that is
adjustable from below 50kHz to over 1MHz. The error
amplifier features a 15MHz gain-bandwidth product and
6V/
μ
s slew rate which enables high converter bandwidth for
fast transient performance. The resulting PWM duty ratio
ranges from 0% to 100%.
The HIP6013 protects against over-current conditions by
inhibiting PWM operation. The HIP6013 monitors the current
by using the r
DS(ON)
of the upper MOSFET which eliminates
the need for a current sensing resistor.
Features
Drives N-Channel MOSFET
Operates From +5V or +12V Input
Simple Single-Loop Control Design
- Voltage-Mode PWM Control
Fast Transient Response
- High-Bandwidth Error Amplifier
- Full 0% to 100% Duty Ratio
Excellent Output Voltage Regulation
- 1.27V Internal Reference
-
±
1.5% Over Line Voltage and Temperature
Over-Current Fault Monitor
- Does Not Require Extra Current Sensing Element
- Uses MOSFET’s r
DS(on)
Small Converter Size
- Constant Frequency Operation
- 200kHz Free-Running Oscillator Programmable from
50kHz to Over 1MHz
14 Ld, SOIC Package
Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
Power Supply for Pentium, Pentium Pro, PowerPC and
Alpha Microprocessors
High-Power 5V to 3.xV DC-DC Regulators
Low-Voltage Distributed Power Supplies
Pinout
HIP6013
(SOIC)
TOP VIEW
Ordering Information
PART
NUMBER
PART
MARKING
TEMP. RANGE
(°C)
PACKAGE
PKG.
DWG. #
HIP6013CB
HIP6013CB
0 to 70
14 Ld SOIC M14.15
HIP6013CBZ
(See Note)
6013CBZ
0 to 70
14 Ld SOIC
(Pb-free)
M14.15
Add “-T” suffix for tape and reel.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations. Intersil
Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
8
9
10
11
12
13
14
7
6
5
4
3
2
1
OCSET
SS
EN
COMP
FB
RT
VCC
NC
NC
BOOT
UGATE
PHASE
GND
NC
Data Sheet
November 3, 2005
PowerPC is a trademark of IBM.
Alpha is a trademark of Digital Equipment Corporation.
Pentium is a registered trademark of Intel Corporation.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774
Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 1997, 2002, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.