
357 Beloit Street, P.O. Box 457, Burlington, WI 53105-0457 U.S.A. Phone 262/763-3591 FAX 262/763-2881
Email:
nelsales@nelfc.com
www.nelfc.com
CMOS Compatible
Enable/Disable
HS-A1370/A1380 Series
Description
The
HS-A1370 Series
of quartz crystal oscillators provide enable/disable 3-state CMOS compatible signals
for bus connected systems. Supplying Pin 1 of the
HS-A1370
units with a logic “0" enables the output on
Pin 8. Alternately, supplying pin 1 of the
HS-A1380
units with a logic “1" enables its Pin 8 output. In the
disabled mode, Pin 8 presents a high impedance to the load. All units are resistance welded in an all metal
package, offering RFI shielding, and are designed to survive standard wave soldering operations without
damage. Insulated standoffs to enhance board cleaning are standard.
Features
Wide frequency range– 0.5MHz to 20.0MHz
User specified tolerance available
Will withstand vapor phase temperatures of 253°C
for 4 minutes maximum
Space-saving alternative to discrete component
oscillators
High shock resistance, to 3000g
All metal, resistance weld, hermetically sealed
package
3.3 Volt operation
Low Jitter
High Q Crystal actively tuned oscillator circuit
Power supply decoupling internal
No internal PLL avoids cascading PLL problems
Low power consumption
Gold plated leads - Solder dipped leads available
upon request
RoHS Compliant, Lead Free Construction
(unless solder dipped leads are supplied)
Electrical Connection
Pin Connection
1 Enable Input
7 Grd & Case
8 Output
14 V
DD
Dimensions are in inches and (MM)
CRYSTAL CLOCK OSCILLATORS
Data Sheet 9617H
Rev. N