
1
File Number
4470.1
HS-1410RH
Radiation Hardened, High Speed, Low
Power, Current Feedback Op Amp with
Output Disable
The Radiation Hardened HS-1410RH is a high speed, low
power current feedback amplifier built with Intersil’s
proprietary complementary bipolar UHF-1 (DI, bonded
wafer) process. This technology provides an immunity to
Single Event Latch-up and the capability of highly reliable
performance in any radiation environment. These devices
are QML approved and are manufactured and screened in
full compliance with MIL-PRF-38535.
This amplifier features a TTL/CMOS compatible DISABLE
control, pin 10, which when pulled low, reduces the supply
current and forces the output into a high impedance state.
This allows easy implementation of simple, low power
multiplexing circuits in redundant spacecraft designs. The
wide bandwidth and fast slew rate make these devices
ideal for pulse and video amplifier and routing applications.
The high output current and disable feature provide the
perfect combination needed for A/D driver/multiplexer
circuits.
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are
contained in SMD 5962-98518. A “hot-link” is provided
on our homepage for downloading.
http://www.intersil.com/spacedefense/space.htm
Features
Electrically Screened to SMD # 5962-98518
QML Qualified per MIL-PRF-38535 Requirements
Radiation Environment
- Total Dose. . . . . . . . . . . . . . . . . . . . . . . 3 x 10
5
RAD(Si)
- SEL. . . . . . . . . . . . . . None (Bonded Wafer DI Process)
Wide 3dB Bandwidth (Typ). . . . . . . . . . . . . . . . . . 360MHz
High Slew Rate (Typ) . . . . . . . . . . . . . . . . . . . . 1000V/
μ
S
High Output Current (Typ) . . . . . . . . . . . . . . . . . . . . 60mA
Low Supply Current (Typ). . . . . . . . . . . . . . . . . . . . 5.9mA
Output Enable/Disable Time (Typ) . . . . . . . . . 180ns/35ns
Upgrade for CLC410/411
Applications
Multiplexing Flash A/D Drivers
High Speed Signal Switching and Routing
Pulse and Video Amplifiers
Wideband Amplifiers
Imaging Systems
Pinout
HS9-1410RH (FLATPACK) CDFP3-F10
TOP VIEW
Ordering Information
ORDERING NUMBER
INTERNAL
MKT. NUMBER
TEMP. RANGE
(
o
C)
5962F9851801VXC
HS9-1410RH-Q
-55 to 125
NC
-IN
+IN
V-
NC
DISABLE
V+
OUT
NC
NC
10
9
8
7
6
2
3
4
5
1
Data Sheet
August 1999
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright Intersil Corporation 1999