- 您現在的位置：買賣IC網 > PDF目錄385394 > HSDL-3211 (Avago Technologies Ltd.) IrDA㈢ Data Compliant Low Power 1.15 Mbit/s Infrared Transceiver PDF資料下載
參數資料
| 型號： | HSDL-3211 |
| 廠商： | Avago Technologies Ltd. |
| 英文描述： | IrDA㈢ Data Compliant Low Power 1.15 Mbit/s Infrared Transceiver |
| 中文描述： | 紅外線㈢數據兼容低功耗1.15 Mbit / s的紅外收發器 |
| 文件頁數： | 11/18頁 |
| 文件大小： | 184K |
| 代理商： | HSDL-3211 |
11
Recommended Metal Solder
Stencil Aperture
It is recommended that only a
0.152 mm (0.006 inches) or a
0.127 mm (0.005 inches) thick
stencil be used for solder paste
printing. This is to ensure
adequate printed solder paste
volume and no shorting. See the
table below the drawing for
combinations of metal stencil
aperture and metal stencil
thickness that should be used.
Aperture opening for shield pad
is 2.7 mm x 1.25 mm as per land
pattern.
APERTURES AS PER
LAND DIMENSIONS
l
w
t
Adjacent Land Keepout and
Solder Mask Areas
Adjacent land keep-out is the
maximum space
occupied by the
unit relative to the land pattern.
There should be no other SMD
components within this area.
The minimum solder resist strip
width required to avoid solder
bridging adjacent pads is
0.2 mm.
It is recommended that two
fiducial crosses be place at mid-
length of the pads for unit
alignment.
Note:
Wet/Liquid Photo-
Imageable solder resist/mask is
recommended.
Stencil thickness, t (mm)
Aperture size (mm)
length, l
width, w
0.152 mm
2.60
±
0.05
0.55
±
0.05
0.127 mm
3.00
±
0.05
0.55
±
0.05
Figure 12. Solder stencil aperature.
Figure 13. Adjacent land keepout and solder mask areas.
0.2
3.0
10.1
SOLDER MASK
3.85
UNITS: mm
相關PDF資料 |
PDF描述 |
|---|---|
| HSDL-3211-021 | IrDA㈢ Data Compliant Low Power 1.15 Mbit/s Infrared Transceiver |
| HSDL-3220 | IrDA㈢ Data Compliant Low Power 4.0 Mbit/s Infrared Transceiver |
| HSDL-3220-001 | IrDA㈢ Data Compliant Low Power 4.0 Mbit/s Infrared Transceiver |
| HSDL-3220-021 | IrDA㈢ Data Compliant Low Power 4.0 Mbit/s Infrared Transceiver |
| HSDL-3602 | IrDA㈢ Data 1.4 Compliant 4 Mb/s 3V Infrared Transceiver |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HSDL-3211-021 | 功能描述:紅外收發器 Short Distance 3V M IR RoHS:否 制造商:Vishay Semiconductors 波長:900 nm 連續數據傳輸:115.2 Kbit/s 傳輸距離:1 m 輻射強度:60 mW/sr 半強度角度:44 deg 脈沖寬度:2 us 最大上升時間:100 ns 最大下降時間:100 ns LED 電源電壓:- 0.5 V to 6 V 最大正向電流:80 mA 工作電壓:2.4 V to 5.5 V 最大工作溫度:+ 85 C 最小工作溫度:- 25 C 尺寸:6 mm x 3.1 mm x 1.9 mm 封裝 / 箱體: 封裝:Reel |
| HSDL-3220 | 制造商:Avago Technologies 功能描述:TRANSCEIVER IRDA 4MB/S |
| HSDL-3220-001 | 制造商:AVAGO 制造商全稱:AVAGO TECHNOLOGIES LIMITED 功能描述:IrDA㈢ Data Compliant Low Power 4.0 Mbit/s Infrared Transceiver |
| HSDL-3220-021 | 功能描述:紅外收發器 20-30cm 3V FIR RoHS:否 制造商:Vishay Semiconductors 波長:900 nm 連續數據傳輸:115.2 Kbit/s 傳輸距離:1 m 輻射強度:60 mW/sr 半強度角度:44 deg 脈沖寬度:2 us 最大上升時間:100 ns 最大下降時間:100 ns LED 電源電壓:- 0.5 V to 6 V 最大正向電流:80 mA 工作電壓:2.4 V to 5.5 V 最大工作溫度:+ 85 C 最小工作溫度:- 25 C 尺寸:6 mm x 3.1 mm x 1.9 mm 封裝 / 箱體: 封裝:Reel |
| HSDL-3310 | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:IrDA 1.3 Data Compliant 1.15Mb/s 3-5V Infrared Transceiver |
發布緊急采購，3分鐘左右您將得到回復。