- 您現在的位置：買賣IC網 > PDF目錄385394 > HSDL-3602-038 (Avago Technologies Ltd.) IrDA㈢ Data 1.4 Compliant 4 Mb/s 3V Infrared Transceiver PDF資料下載
參數資料
| 型號： | HSDL-3602-038 |
| 廠商： | Avago Technologies Ltd. |
| 英文描述： | IrDA㈢ Data 1.4 Compliant 4 Mb/s 3V Infrared Transceiver |
| 中文描述： | ㈢數據的IrDA 1.4兼容4 Mb / s的3V的紅外收發器 |
| 文件頁數： | 16/27頁 |
| 文件大小： | 388K |
| 代理商： | HSDL-3602-038 |
第1頁第2頁第3頁第4頁第5頁第6頁第7頁第8頁第9頁第10頁第11頁第12頁第13頁第14頁第15頁當前第16頁第17頁第18頁第19頁第20頁第21頁第22頁第23頁第24頁第25頁第26頁第27頁
16
Figure 4. Solder paste stencil aperture.
See Figure 4
w, the width of aperture is fixed at 0.70 mm (0.028 inches)
Aperture opening for shield pad is 2.8 mm x 2.35 mm as per land dimension.
t, nominal stencil thickness
mm
0.152
0.127
l, length of aperture
mm
2.8 ± 0.05
3.4 ± 0.05
inches
0.006
0.005
inches
0.110 ± 0.002
0.134 ± 0.002
2.0. Recommended solder paste/cream volume for castel-
lation joints
Based on calculation and experiment, the printed sol-
der paste volume required per castellation pad is 0.30
cubic mm (based on either no-clean or aqueous solder
cream types with typically 60 to 65% solid content by
volume).
2.1. Recommended Metal Solder Stencil Aperture
It is recommended that only 0.152 mm (0.006 inches) or
0.127 mm (0.005 inches) thick stencil be used for solder
paste printing. This is to ensure adequate printed solder
paste volume and no shorting. The following combina-
tion of metal stencil aperture and metal stencil thick-
ness should be used:
3.0. Pick and Place Misalignment Tolerance and Product
Self-Alignment after Solder Reflow
If the printed solder paste volume is adequate, the
unit will self-align in the X-direction after solder reflow.
Units should be properly reflowed in IR Hot Air convec-
tion oven using the recommended reflow profile. The
direction of board travel does not matter.
Allowable Misalignment Tolerance
X-direction
Theta-direction
≤ 0.2 mm (0.008 inches)
± 2 degrees
HSDL-3602 fig 4.0
APERTURE AS PER
LAND
SOLDER
PASTE
l
w
t (STENCIL THICKNESS)
相關PDF資料 |
PDF描述 |
|---|---|
| HSDL-3603 | IrDA㈢ Data Compliant 4 Mbit/s Infrared Transceiver |
| HSDL-3603-207 | IrDA㈢ Data Compliant 4 Mbit/s Infrared Transceiver |
| HSDL-3603-208 | IrDA㈢ Data Compliant 4 Mbit/s Infrared Transceiver |
| HSDL-4250 | High-Performance T-1 (5mm) AlGaAs Infrared (870nm) Lamp |
| HSDL-4251 | High-Performance T-1 (5mm) AlGaAs Infrared (870nm) Lamp |
相關代理商/技術參數 |
參數描述 |
|---|---|
| HSDL-3603 | 制造商:AVAGO 制造商全稱:AVAGO TECHNOLOGIES LIMITED 功能描述:IrDA㈢ Data Compliant 4 Mbit/s Infrared Transceiver |
| HSDL-3603-007 | 制造商:Lite-On Semiconductor Corporation 功能描述:IRDA TX/RX 4MBPS 2.7V TO 5.25V - Bulk 制造商:Avago Technologies 功能描述:TRANSCEIVER SMD IRDA1.4 4MB |
| HSDL-3603-007 | 制造商:Avago Technologies 功能描述:TRANSCEIVER SMD IRDA1.4 4MB |
| HSDL-3603-017 | 制造商:Lite-On Semiconductor Corporation 功能描述:IRDA TX/RX 4MBPS 3.3V/5V - Bulk |
| HSDL-3603-207 | 制造商:AVAGO 制造商全稱:AVAGO TECHNOLOGIES LIMITED 功能描述:IrDA㈢ Data Compliant 4 Mbit/s Infrared Transceiver |
發布緊急采購，3分鐘左右您將得到回復。