- 您現在的位置：買賣IC網 > PDF目錄360998 > ISP1105W (NXP SEMICONDUCTORS) Advanced Universal Serial Bus transceivers PDF資料下載
參數資料
| 型號： | ISP1105W |
| 廠商： | NXP SEMICONDUCTORS |
| 元件分類： | 通用總線功能 |
| 英文描述： | Advanced Universal Serial Bus transceivers |
| 中文描述： | LINE TRANSCEIVER, PBCC16 |
| 封裝： | LEAD AND HALOGEN FREE, 3 X 3 MM, 0.65 MM HEIGHT, PLASTIC, MO-217, SOT-639-2, HBCC-16 |
| 文件頁數： | 6/24頁 |
| 文件大小： | 588K |
| 代理商： | ISP1105W |
Philips Semiconductors
ISP1105/1106/1107
Advanced USB transceivers
Product data
Rev. 06 — 30 November 2001
6 of 24
9397 750 08872
Koninklijke Philips Electronics N.V. 2001. All rights reserved.
[1]
[2]
Symbol names with an overscore (e.g. NAME) indicate active LOW signals.
Down bonded to the exposed diepad.
7.
Functional description
7.1 Function selection
[1]
[2]
Signal levels on (D
+
, D
)
are determined by other USB devices and external pull-up/down resistors.
In ‘suspend’ mode (SUSPND = HIGH) the differential receiver is inactive and output RCV is always
LOW. Out-of-suspend (‘K’) signalling is detected via the single-ended receivers VP and VM.
During suspend, the slew-rate control circuit of low-speed operation is disabled. The (D
+
, D
)
lines
are still driven to their intended states, without slew-rate control. This is permitted because driving
during suspend is used to signal remote wake-up by driving a ‘K’ signal (one transition from idle to
‘K’ state) for a period of 1 to 15 ms.
[3]
V
reg(3.3)
13
13
15
-
Internal regulator option:
regulated supply voltage output
(3.0 to 3.6 V) during 5 V operation; a decoupling capacitor
of at least 0.1
μ
F is required
Regulator bypass option:
used as a supply voltage input
for 3.3 V operation. (3.3 V
±
10%)
Internal regulator option:
supply voltage input
(4.0 to 5.5 V); can be connected directly to USB supply
V
BUS
Regulator bypass option:
connect to V
reg(3.3)
pull-up supply voltage (3.3 V
±
10%); connect an external
1.5 k
resistor on D
+
(full-speed) or D
(low-speed); pin
function is controlled by input SOFTCON:
V
CC(5.0)
14
14
16
-
V
pu(3.3)
15
15
1
-
SOFTCON = LOW —
V
pu(3.3)
floating (high impedance);
ensures zero pull-up current
SOFTCON = HIGH —
V
pu(3.3)
= 3.3 V; internally connected
to V
reg(3.3)
software controlled USB connection input; a HIGH level
applies 3.3 V to pin V
pu(3.3)
, which is connected to an
external 1.5 k
pull-up resistor; this allows USB
connect/disconnect signalling to be controlled by software
SOFTCON
16
16
2
I
Table 3:
Symbol
[1]
Pin description
…continued
Pin
ISP1105
HBCC16
Type
Description
ISP1106/7
HBCC16
ISP1106/7
TSSOP16
Table 4:
SUSPND
L
Function table
OE
L
(D
+
, D
)
driving &
receiving
receiving
[1]
driving
RCV
active
VP/VM
active
Function
normal driving
(differential receiver active)
receiving
driving during ‘suspend’
[3]
(differential receiver inactive)
low-power state
L
H
H
L
active
inactive
[2]
active
active
H
H
high-Z
[1]
inactive
[2]
active
相關PDF資料 |
PDF描述 |
|---|---|
| ISP1106 | Advanced Universal Serial Bus transceivers |
| ISP1106DH | GT 10C 10#16 SKT PLUG |
| ISP1106W | GT 5C 5#16 PIN PLUG |
| ISP1107 | Advanced Universal Serial Bus transceiver |
| ISP1107DH | Advanced Universal Serial Bus transceivers |
相關代理商/技術參數 |
參數描述 |
|---|---|
| ISP1105W,115 | 功能描述:射頻收發器 USB1.1 TRANSCEIVER RoHS:否 制造商:Atmel 頻率范圍:2322 MHz to 2527 MHz 最大數據速率:2000 Kbps 調制格式:OQPSK 輸出功率:4 dBm 類型: 工作電源電壓:1.8 V to 3.6 V 最大工作溫度:+ 85 C 接口類型:SPI 封裝 / 箱體:QFN-32 封裝:Tray |
| ISP1105W,118 | 功能描述:射頻收發器 USB1.1 LOW VOLTAGE RoHS:否 制造商:Atmel 頻率范圍:2322 MHz to 2527 MHz 最大數據速率:2000 Kbps 調制格式:OQPSK 輸出功率:4 dBm 類型: 工作電源電壓:1.8 V to 3.6 V 最大工作溫度:+ 85 C 接口類型:SPI 封裝 / 箱體:QFN-32 封裝:Tray |
| ISP1105W-T | 功能描述:USB 接口集成電路 USB1.1 LOW VOLTAGE TRANSCEIVER RoHS:否 制造商:Cypress Semiconductor 產品:USB 2.0 數據速率: 接口類型:SPI 工作電源電壓:3.15 V to 3.45 V 工作電源電流: 最大工作溫度:+ 85 C 安裝風格:SMD/SMT 封裝 / 箱體:WLCSP-20 |
| ISP1105WTM | 功能描述:IC TXRX SERIAL BUS ADV 16HBCC RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 產品培訓模塊:Lead (SnPb) Finish for COTS Obsolescence Mitigation Program 標準包裝:25 系列:- 類型:收發器 驅動器/接收器數:2/2 規程:RS232 電源電壓:4.5 V ~ 5.5 V 安裝類型:通孔 封裝/外殼:16-DIP（0.300"，7.62mm） 供應商設備封裝:16-PDIP 包裝:管件 |
| ISP1105WTS | 功能描述:IC USB TRANSCEIVER 16-HBCC RoHS:是 類別:集成電路 (IC) >> 接口 - 驅動器，接收器，收發器 系列:- 標準包裝:1,140 系列:AU 類型:收發器 驅動器/接收器數:1/1 規程:CAN 電源電壓:5.3 V ~ 27 V 安裝類型:表面貼裝 封裝/外殼:14-SOIC（0.154"，3.90mm 寬） 供應商設備封裝:14-SO 包裝:管件 其它名稱:935267940512AU5790D14AU5790D14-ND |
發布緊急采購，3分鐘左右您將得到回復。