- 您現在的位置：買賣IC網 > PDF目錄30719 > LA4663 20 W, 2 CHANNEL, AUDIO AMPLIFIER, PZFM14 PDF資料下載
參數資料
| 型號： | LA4663 |
| 元件分類： | 音頻／視頻放大 |
| 英文描述： | 20 W, 2 CHANNEL, AUDIO AMPLIFIER, PZFM14 |
| 封裝： | SIP-14 |
| 文件頁數： | 7/10頁 |
| 文件大小： | 113K |
| 代理商： | LA4663 |
External Components
C1 and C2
These are input coupling capacitors, and we recommend that values under 4.7 F be used. The LA4663 uses a zero
bias type input circuit, and the input pin potential is about zero volts. Determine the polarity orientation of these
capacitors based on the DC current from the circuit connected to the LA4663 front end.
If the potential difference between across the + and – leads on the input capacitors is large, the charge time for the
input capacitors can be reduced by using as small a value as possible without causing degradation of the low band
frequency characteristics. This will shorten the time required to reach stable operation when power is first applied.
C3 *1
This capacitor functions both as a ripple filter and as the amplifier starting time capacitor. We recommend a value of
47 F. When the recommended value is used, the BTL SVRR between outputs will be about 63 dB, and that between
the outputs and ground will be about 47 dB. (These are values are for reference purposes.) Similarly, the starting time
(the time between the point power is first applied and the point an output is generated) will be around 0.6 to 0.7
seconds.
C4 and R1 *2
These form an CR circuit used for muting function smoothing. C4 is required even if the muting function is not used.
C5
Power supply capacitor
C6 to C9 and R2 to R5
These components for oscillation prevention CR circuits. We recommend the use of polyester film capacitors (Mylar
capacitors) with excellent temperature characteristics for C6 through C9. (R2 to R5 should all be 2.2-
1/4-W
resistors.)
Notes: 1. Starting time
The LA4663 includes a built-in starting time circuit. The starting time can be varied somewhat by modifying
the value of the external capacitor connected to pin 1. With the recommended value of 47 F, the starting time
will be between 0.6 and 0.7 second (although this will vary with the supply voltage, VCC) and this time can be
lengthened to about 0.9 second by inserting a 10 F capacitor in parallel.
We do not recommend using a value smaller than the recommended value for the pin 1 capacitor, since that
could result in reducing the SVRR with respect to ground.
2. Signal muting function
When the recommended CR circuit (10 F and 22 k
) is connected to pin 6, the signal muting function can be
turned on, and a muting function with minimal impulse noise applied by applying a voltage of 5V.
The CR circuit determines the attack and recovery times for smoothing function. Note that this 10-F capacitor
is required even when the signal muting function is not used, since it is also used for smoothing after the
starting time has elapsed.The influx current to pin 6 when this external resistor has a value of
22 k
will be about 170 A when the applied voltage is +5
V. Although it is possible to modify the value of this resistor
if a different applied voltage or if the capacity of the
microcontroller required it, it is possible for the level of the
impulse noise associated with the muting function to increase
if the pin 6 influx current becomes excessive. Be sure to take
this influx current into account if the value of this resistor is
modified.
No. 5905-6/10
LA4663
+
–
6
+5 V
22 k
10
F
I
About 1.56 V
A10631
相關PDF資料 |
PDF描述 |
|---|---|
| LA4700N | 12 W, 2 CHANNEL, AUDIO AMPLIFIER, PSFM18 |
| LA4705 | 18 W, 2 CHANNEL, AUDIO AMPLIFIER, PSFM18 |
| LA4708 | 30 W, 2 CHANNEL, AUDIO AMPLIFIER, SFM18 |
| LA47202P | 29 W, 4 CHANNEL, AUDIO AMPLIFIER, ZFM25 |
| LA47202P | 29 W, 4 CHANNEL, AUDIO AMPLIFIER, ZFM25 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LA4663-B-E | 制造商:ON Semiconductor 功能描述:AUDIO AMPLIFIER BTL 2CH - Ammo Pack |
| LA4663-E | 功能描述:音頻放大器 RoHS:否 制造商:STMicroelectronics 產品:General Purpose Audio Amplifiers 輸出類型:Digital 輸出功率: THD + 噪聲: 工作電源電壓:3.3 V 電源電流: 最大功率耗散: 最大工作溫度: 安裝風格:SMD/SMT 封裝 / 箱體:TQFP-64 封裝:Reel |
| LA46B-DBKUG-7-PF | 制造商:LIGITEK 制造商全稱:LIGITEK electronics co., ltd. 功能描述:LED ARRAY |
| LA46B-EG-4-PF | 制造商:LIGITEK 制造商全稱:LIGITEK electronics co., ltd. 功能描述:LED ARRAY |
| LA46B-EG-9-PF | 制造商:LIGITEK 制造商全稱:LIGITEK electronics co., ltd. 功能描述:LED ARRAY |
發布緊急采購，3分鐘左右您將得到回復。