- 您現在的位置：買賣IC網 > PDF目錄30723 > LA75501 AM/FM, AUDIO/VIDEO DEMODULATOR, PDIP24 PDF資料下載
參數資料
| 型號： | LA75501 |
| 元件分類： | 接收器 |
| 英文描述： | AM/FM, AUDIO/VIDEO DEMODULATOR, PDIP24 |
| 封裝： | 0.300 INCH, DIP-24 |
| 文件頁數： | 3/11頁 |
| 文件大小： | 112K |
| 代理商： | LA75501 |
Fig. 12
Pins 5 and 6 (VIF input)
These are the VIF amplifier input pins. The inputs must always
have their DC components eliminated with capacitors. The
inputs are equilibrium inputs.
The input impedance is R
6 1.5 kΩ,C 6 3pF.
Sanyo’s SAW filter
There are two types of filters, depending on the piezoelectric substrate material.
(1) LiTaO3 (lithium tantalate) SAW filters: ...... TSF1xxx
TSF2xxx
While the LiTaO3 SAW filters offer excellent stability with a low temperature coefficient of –18 ppm/ °C, the insertion loss is
high. However, by using a coil, etc., for matching on the SAW filter output side (which does increase the number of external
components), it is possible to suppress the insertion loss while at the same time making the level of the characteristics
variable, which provides additional design freedom. (Refer to Fig. 13.)
In addition, because the SAW (surface wave) reflection is small, ripple within the band can be kept low.
(2) LiNbO3 (lithium niobate) SAW filter: ...... TSF5xxx
While the LiNbO3 SAW filter has a high temperature coefficient of –72 ppm/ °C, it has a lower insertion loss by about 10 dB
compared to the LiTaO3 SAW filters. Therefore, matching on the output side of the SAW filter is not necessary. (Refer to Fig.
14.)
In addition, because the insertion loss is low (although the ripple within the band is somewhat higher than in the case of the
LiTaO3 SAW filter), the low impedance and small feedthrough diminish the effects of peripheral circuit components and the
pattern layout, and make it possible to stabilize the trap characteristics outside of the band.
From the above, it is clear that the LiTaO3 SAW filter is suitable for Japan and U.S. bands where the IF frequency is high, while
the LiNbO3 SAW filter is suitable for PAL and U.S. bands where the IF frequency is low.
0.01μF
Fig. 13
Fig. 14
0.01μF
LA7578N
No.4952-11/18
相關PDF資料 |
PDF描述 |
|---|---|
| LA75501 | AM/FM, AUDIO/VIDEO DEMODULATOR, PDIP24 |
| LA75503V | AM/FM, AUDIO/VIDEO DEMODULATOR, PDSO30 |
| LA75503V | AM/FM, AUDIO/VIDEO DEMODULATOR, PDSO30 |
| LA75505M | AM/FM, AUDIO/VIDEO DEMODULATOR, PDSO24 |
| LA75520KVA | AM/FM, AUDIO/VIDEO DEMODULATOR, PDSO24 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LA75501V | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:For Use in TV/VTR Applications VIF/SIF Signal Processing IC |
| LA75501V_07 | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:For Use in TV/VTR Applications VIF/SIF Signal Processing IC |
| LA75503V | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:Adjustment Free VIF/SIF Signal Processing IC for PAL TV/VCR |
| LA75503V_07 | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:For PAL TV/VCR Adjustment Free VIF/SIF Signal Processing IC |
| LA75505M | 制造商:未知廠家 制造商全稱:未知廠家 功能描述: |
發布緊急采購，3分鐘左右您將得到回復。