- 您現在的位置：買賣IC網 > PDF目錄30724 > LA7567BVA AM/FM, AUDIO/VIDEO DEMODULATOR, PDSO24 PDF資料下載
參數資料
| 型號： | LA7567BVA |
| 元件分類： | 接收器 |
| 英文描述： | AM/FM, AUDIO/VIDEO DEMODULATOR, PDSO24 |
| 封裝： | 0.225 INCH, SSOP-24 |
| 文件頁數： | 20/20頁 |
| 文件大小： | 184K |
| 代理商： | LA7567BVA |
No.7939-9/20
LA7567BVA
V26.V27. VCO Maximum variable range(U, L) . . . [dfu, dfl]
(1) Apply the VCC voltage to the external AGC, IF AGC (pin 17).
(2) Pick up the VCO oscillation frequency from the VIDEO output (A), GND, etc. and adjust the VCO coil so coil
that the frequency becomes 38.9MHz.
(3) fl is taken as the frequency when 1V is applied to the APC pin (pin 9). In the same manner,
fu is taken as the frequency when 5V is applied to the APC pin (pin 9).
dfu = fu - 38.9MHz
dfl = fl - 38.9MHz
V28. VCO control sensitivity . . . . . . . . . . . . . . . . . [
β]
(1) Apply the VCC voltage to the external AGC, IF AGC (pin 17).
(2) Pick up the VCO oscillation frequency from the VIDEO output (A), GND, etc. and adjust the VCO coil so that
the frequency becomes 38.9MHz.
(3) f1 is taken as the frequency when 3.0V applied to the APC pin (pin 9). In the same manner,
f2 is taken as the frequency when 3.4V is applied to the APC pin (pin 9).
V29. Synchronization ratio . . . . . . . . . . . . . . . . . . [VS]
(1) Internal AGC
(2) fp = 38.9MHz 87.5% 10STEP B/W
Vi = 10mVrms
(3) Measure the output amplitude at the measuring point A . . . . . . . . . . . Vvideo
(4) Measure the pedestal voltage (DC) at the measuring point A . . . . . . . Vped
VS = (Vped-V6tip)/Vvideo × 100 (%)
F1. First SIF conversion gain . . . . . . . . . . . . . . . . [VG]
(1) Internal AGC
(2) fp = 38.9MHz CW; 10mV (VIF input)
fs = 33.4MHz CW; 500
V (First SIF input) . . . . V1
(3) Detection output level at test point C (Vrms) . . . . V2 (5.5MHz)
(4)
F2. 5.5MHz output level . . . . . . . . . . . . . . . . . . . . . [SO]
(1) Internal AGC
(2) fp = 38.9MHz CW; 10mV (VIF input)
fs = 33.4MHz CW; 10mV (First SIF input) . . . . . . . . . . . . . . . . . V1
(3) Detection output level at test point C (5.5MHz) . . . . . . . . . . . . . . SO (mVrms)
F3. First SIF maximum input. . . . . . . . . . . . . . . . . [Simax]
(1) Internal AGC
(2) fp = 38.9MHz CW;10mV (VIF input)
fs = 33.4MHz CW;variable (First SIF input)
(3) Input level at which the detection output at test point C (5.5MHz) becomes So
±2dB......Simax
F4. F5. First SIF input resistance, input capacitance . . . . [Ri(SIF1), Ci(SIF1)]
(1) Using an input analyzer, measure Ri and Ci in the input impedance measuring circuit.
(
)
mV
kHz
400
f1
f2
β
–
=
dB
V1
V2
20log
VG =
相關PDF資料 |
PDF描述 |
|---|---|
| LA7567BVA | AM/FM, AUDIO/VIDEO DEMODULATOR, PDSO24 |
| LA7567EV-A | AM/FM, AUDIO/VIDEO DEMODULATOR, PDSO24 |
| LA7567EV-A | AM/FM, AUDIO/VIDEO DEMODULATOR, PDSO24 |
| LA7567EV | AM/FM, AUDIO/VIDEO DEMODULATOR, PDSO24 |
| LA7567EV | AM/FM, AUDIO/VIDEO DEMODULATOR, PDSO24 |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LA7567EV | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:TV and VCR VIF/SIF IF Signal-Processing Circuit with PAL/NTSC Multi-Format Audio Support |
| LA7567GM | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:TV and VCR VIF/SIF IF Signal-Processing Circuit with NTSC SPLIT Support |
| LA7567N | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:TV and VCR VIF/SIF IF Signal-Processing Circuit with PAL/NTSC Multi-Format Audio Support |
| LA7567NM | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:TV and VCR VIF/SIF IF Signal-Processing Circuit with PAL/NTSC Multi-Format Audio Support |
| LA75691 | 制造商:SANYO 制造商全稱:Sanyo Semicon Device 功能描述:IF Signal-Processing IC for PAL/NTSC Multichannel Audio TV and VCR Systems |
發布緊急采購，3分鐘左右您將得到回復。