- 您現在的位置：買賣IC網 > PDF目錄367511 > LB1047AS Analog IC PDF資料下載
參數資料
| 型號： | LB1047AS |
| 英文描述： | Analog IC |
| 中文描述： | 模擬IC |
| 文件頁數： | 23/24頁 |
| 文件大小： | 377K |
| 代理商： | LB1047AS |
Product Specification
23 / 24
LB104V03
Liquid Crystal Display
Ver. 1.1
Oct. 10, 2003
9. PRECAUTIONS
Please pay attention to the followings when you use this TFT LCD module.
9-1. MOUNTING PRECAUTIONS
(1) You must mount a module using holes arranged in four corners or four sides.
(2) You should consider the mounting structure so that uneven force (ex. Twisted stress) is not applied to the
module. And the case on which a module is mounted should have sufficient strength so that external
force is not transmitted directly to the module.
(3) Please attach the surface transparent protective plate to the surface in order to protect the polarizer.
Transparent protective plate should have sufficient strength in order to the resist external force.
(4) You should adopt radiation structure to satisfy the temperature specification.
(5) Acetic acid type and chlorine type materials for the cover case are not desirable because the former
generates corrosive gas of attacking the polarizer at high temperature and the latter causes circuit break
by electro-chemical reaction.
(6) Do not touch, push or rub the exposed polarizers with glass, tweezers or anything harder than HB
pencil lead. And please do not rub with dust clothes with chemical treatment.
Do not touch the surface of polarizer for bare hand or greasy cloth.(Some cosmetics are detrimental
to the polarizer.)
(7) When the surface becomes dusty, please wipe gently with absorbent cotton or other soft materials like
chamois soaks with petroleum benzene. Normal-hexane is recommended for cleaning the adhesives
used to attach front / rear polarizers. Do not use acetone, toluene and alcohol because they cause
chemical damage to the polarizer.
(8) Wipe off saliva or water drops as soon as possible. Their long time contact with polarizer causes
deformations and color fading.
(9) Do not open the case because inside circuits do not have sufficient strength.
9-2. OPERATING PRECAUTIONS
(1) The spike noise causes the mis-operation of circuits. It should be lower than following voltage :
V=
±
200mV(Over and under shoot voltage)
(2) Response time depends on the temperature.(In lower temperature, it becomes longer.)
(3) Brightness depends on the temperature. (In lower temperature, it becomes lower.)
And in lower temperature, response time(required time that brightness is stable after turned on) becomes
longer.
(4) Be careful for condensation at sudden temperature change. Condensation makes damage to polarizer or
electrical contacted parts. And after fading condensation, smear or spot will occur.
(5) When fixed patterns are displayed for a long time, remnant image is likely to occur.
(6) Module has high frequency circuits. Sufficient suppression to the electromagnetic interference shall be
done by system manufacturers. Grounding and shielding methods may be important to minimized the
interference.
相關PDF資料 |
PDF描述 |
|---|---|
| LB1048AAJ | Voltage-Mode SMPS Controller |
| LB1048AG | Voltage-Mode SMPS Controller |
| LB1103 | |
| LB1108AD | Voltage-Feedback Operational Amplifier |
| LB1109AB | Isolation Amplifier |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LB1047ASTR | 制造商:LUCENT 功能描述:* |
| LB1048AAJ | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Voltage-Mode SMPS Controller |
| LB1048AG | 制造商:未知廠家 制造商全稱:未知廠家 功能描述:Voltage-Mode SMPS Controller |
| LB104S01-OF | 制造商:AIS 功能描述:AIS OPEN FRAME SOLUTION FOR PANEL LB104S01 - Bulk |
| LB104S01-TL01-OF | 制造商:AIS 功能描述:AIS OPEN FRAME - Bulk |
發布緊急采購，3分鐘左右您將得到回復。