- 您現在的位置：買賣IC網 > PDF目錄79925 > LS1601-9PD9B2 1-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE PDF資料下載
參數資料
| 型號： | LS1601-9PD9B2 |
| 元件分類： | 電源模塊 |
| 英文描述： | 1-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE |
| 封裝： | METAL, CASE S02, MODULE |
| 文件頁數： | 1/25頁 |
| 文件大小： | 591K |
| 代理商： | LS1601-9PD9B2 |
Cassette Style
100 Watt AC-DC (DC-DC) Converters
S Series
Edition 01/01.2001
1/25
Safety according to IEC/EN 60950
100 Watt AC-DC (DC-DC) Converters
S Series
for 400 Hz Mains
Input frequency range 47...440 Hz
No PFC
Extremely wide input voltage range
Input over- and undervoltage lock-out
Efficient input filter and built-in surge and transient
suppression circuitry
Fully isolated outputs
Outputs overload, open- and short-circuit proof
No derating over entire operating temperature range
Table of Contents
Page
Summary .......................................................................... 1
Type Survey and Key Data .............................................. 2
Type Key .......................................................................... 2
Functional Description ...................................................... 3
Electrical Input Data ......................................................... 4
Electrical Output Data ...................................................... 5
Auxiliary Functions ......................................................... 10
Summary
The S series of AC-DC (DC-DC) converters represents a
flexible range of power supplies for use in advanced elec-
tronic systems. Features include wide input frequency
range (no PFC), high efficiency, high reliability, low output
voltage noise and excellent dynamic response to load/line
changes.
The converter inputs are protected against surges and tran-
sients occuring at the source lines. An input over- and
undervoltage lock-out circuitry disables the outputs if the
input voltage is outside the specified range. Certain types
include an inrush current limitation preventing circuit break-
ers and fuses from being damaged at switch-on.
All outputs are open- and short-circuit proof and are pro-
tected against overvoltages by means of a built-in suppres-
sor diode. The outputs can be inhibited by a logic signal ap-
plied to the connector pin 18 (i). If the inhibit function is not
used pin 18 must be connected to pin 14 to enable the out-
puts.
LED indicators display the status of the converter and allow
visual monitoring of the system at any time.
Full input to output, input to case, output to case and output
to output isolation is provided. The modules are designed
and built according to international safety standards
IEC/EN 60950 and have been approved by the safety
agencies LGA (Germany) und UL (USA). The UL Mark for
Canada has been officially recognized by regulatory au-
thorities in provinces across Canada.
The case design allows operation at nominal load up to
71
°C in a free air ambient temperature. If forced cooling is
provided, the ambient temperature may exceed 71
°C but
the case temperature must remain below 95
°C under all
conditions.
A temperature sensor generates an inhibit signal which
disables the outputs if the case temperature
TC exceeds the
limit. The outputs are automatically re-enabled when the
temperature drops below the limit.
Various options are available to adapt the converters to in-
dividual applications.
The modules may either be plugged into 19" rack systems
according to DIN 41494, or be chassis mounted.
Important: For applications with requirements for com-
pliance with IEC/EN 61000-3-2 (harmonic distortion)
please use our LS 4000 and LS 5000 series.
Page
Electromagnetic Compatibility (EMC) ............................ 13
Immunity to Environmental Conditions ........................... 15
Mechanical Data ............................................................ 16
Safety and Installation Instructions ................................ 17
Description of Options .................................................... 19
Accessories .................................................................... 25
168
6.6"
80
3.2"
16 TE
111
4.4"
3 U
Input voltage range from 85…264 V AC
1 or 2 isolated outputs up to 48 V DC
4 kV AC I/O electric strength test voltage
LGA
相關PDF資料 |
PDF描述 |
|---|---|
| LS1601-9PDDTB2 | 1-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE |
| LS1601-9PDDT | 1-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE |
| LS2320-7ERDDT | 2-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE |
| LS2320-7PD6B2 | 2-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE |
| LS2320-7RD8TB2 | 2-OUTPUT 100 W AC-DC REG PWR SUPPLY MODULE |
相關代理商/技術參數 |
參數描述 |
|---|---|
| LS1601-9R | 制造商:Power-One 功能描述:100W,AC,DC, 24V OUT, RUGGED - Bulk |
| LS1608 | 制造商:ICE 制造商全稱:ice Components, Ins. 功能描述:Surface Mount Power Inductors |
| LS1608_08 | 制造商:ICE 制造商全稱:ice Components, Ins. 功能描述:Surface Mount Power Inductors |
| LS1608-100-RM | 制造商:ICE 制造商全稱:ice Components, Ins. 功能描述:Surface Mount Power Inductors |
| LS1608-101-RM | 制造商:ICE 制造商全稱:ice Components, Ins. 功能描述:Surface Mount Power Inductors |
發布緊急采購，3分鐘左右您將得到回復。