- 您現在的位置：買賣IC網 > PDF目錄141375 > MAP4KE56CATRE3 (MICROSEMI CORP-SCOTTSDALE) 400 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-204AL PDF資料下載
參數資料
| 型號： | MAP4KE56CATRE3 |
| 廠商： | MICROSEMI CORP-SCOTTSDALE |
| 元件分類： | TVS二極管 - 瞬態電壓抑制 |
| 英文描述： | 400 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-204AL |
| 封裝： | ROHS COMPLIANT, PLASTIC, DO-41, 2 PIN |
| 文件頁數： | 1/4頁 |
| 文件大小： | 214K |
| 代理商： | MAP4KE56CATRE3 |
400 Watt Transient Voltage Suppressor
Microsemi
Scottsdale Division
8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503
Page 1
Copyright
2005
8-04-2005 REV C
WWW
.Microse
m
i
.CO
M
S C O T TS DALE DIVISION
P4KE6.8 thru P4KE400CA, e3
P4KE6.8
thru
400
DESCRIPTION
APPEARANCE
This 400 W Transient Voltage Suppressor (TVS) series is an economical
molded axial-leaded package to protect voltage-sensitive components from
destructive or partial degradation. They are available in both unidirectional
or bi-directional configurations as well as RoHS Compliant (annealed
matte-Tin finish) with an e3 suffix added to the part number. They have a
peak pulse power rating of 400 watts for a 10/1000 s as depicted in
Figures 1 and 2.
The nominal breakdown voltages (VBR) in this series
extend from 6.8 to 400 volts. Microsemi also offers a broad spectrum of
additional TVSs to meet your needs.
IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com
FEATURES
APPLICATIONS / BENEFITS
Economical series for thru-hole mounting
Available in both unidirectional and bi-directional (add C
or CA suffix to part number for bidirectional)
Voltages from 6.8 to 400 V Breakdown (V
BR)
Fast Response
Optional 100% screening for avionics grade is
available by adding MA prefix to part number for added
100% temperature cycle -55
oC to +125oC (10X) as well
as surge (3X) and 24 hours HTRB with post test VZ &
IR (in the operating direction for unidirectional or both
directions for bidirectional)
Options for screening in accordance with MIL-PRF-
19500 for JAN, JANTX, JANTXV, or JANS are
available by adding MQ, MX, MV, or MSP prefixes
respectively to part numbers
RoHS Compliant devices avaialbe by adding “e3” suffix
Surface mount equivalents available as SMAJP4KE6.8
to SMAJP4KE400CA
Moisture classification is Level 1 with no dry pack
required per IPC/JEDEC J-STD-020B
Suppresses transients up to 400 watts @ 10/1000 μs
(see Figure 1)
Protects sensitive components such as IC’s, CMOS,
Bipolar, BiCMOS, ECL, DTL, T
2
L, etc.
Protection from switching transients & induced RF
Compliant to IEC61000-4-2 and IEC61000-4-4 for
ESD and EFT protection respectively
Secondary lightning protection per IEC61000-4-5
with 42 Ohms source impedance:
Class 1: P4KE5.0 to P4KE91A or CA
Class 2: P4KE5.0 to P4KE47A or CA
Class 3: P4KE5.0 to P4KE24A or CA
Class 4: P4KE5.0 to P4KE12A or CA
Secondary lightning protection per IEC61000-4-5
with 12 Ohms source impedance:
Class 1: P4KE5.0 to P4KE30A or CA
Class 2: P4KE5.0 to P4KE15A or CA
MAXIMUM RATINGS
MECHANICAL AND PACKAGING
Operating and Storage Temperature: -65°C to +150°C
Peak Pulse Power: 400 Watts at 10/1000 μs (see Figure
1, 2 and 3 for tW, waveform and derating effects)
Impulse repetition rate (duty factor): 0.01%
Thermal Resistance: 50°C/W junction to leads @ 3/8
inch (10 mm) from body, or 110
°C/W junction to ambient
when mounted on FR4 PC board with 4 mm
2 copper
pads (1oz) and track width 1 mm, length 25 mm
Steady-State Power: 2.5 Watts @ T
L=25°C at 3/8 inch
(10 mm) from body, or 1.13 W at TA = 25
C on FR4 PC
board described for thermal resistance
Forward Voltage at 25°C: 3.5 V @ 30 A with 8.3 ms half-
sine wave (unidirectional only)
Solder temperatures: 260 °C for 10 s (maximum)
CASE: Void-free transfer molded thermosetting
epoxy body meeting UL94V-0
FINISH: Tin-Lead or RoHS Compliant annealed
matte-Tin plating readily solderable per MIL-STD-
750, method 2026
MARKING: Body marked with part number
POLARITY: Band denotes cathode. Bidirectional
not marked
WEIGHT: 0.3 grams (approximate)
TAPE & REEL option: Standard per EIA-296 (add
“TR” suffix to part number)
See package dimensions on last page
DO-41
(DO-204AL)
相關PDF資料 |
PDF描述 |
|---|---|
| MAP4KE68E3 | 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-204AL |
| MAP4KE75CAE3 | 400 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-204AL |
| MASMAJP4KE180TR | 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC |
| MASMAJP4KE220C | 400 W, BIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC |
| MASMAJP4KE350 | 400 W, UNIDIRECTIONAL, SILICON, TVS DIODE, DO-214AC |
相關代理商/技術參數 |
參數描述 |
|---|---|
| MAP4KE6.8A | 制造商:Microsemi Corporation 功能描述:TRANSIENT VOLTAGE SUPPRESSOR - Bulk |
| MAP4KE6.8AE3 | 制造商:Microsemi Corporation 功能描述:TRANSIENT VOLTAGE SUPPRESSOR - Bulk |
| MAP4KE6.8CA | 制造商:Microsemi Corporation 功能描述:TRANSIENT VOLTAGE SUPPRESSOR - Bulk |
| MAP4KE6.8CAE3 | 制造商:Microsemi Corporation 功能描述:TRANSIENT VOLTAGE SUPPRESSOR - Bulk |
| MAP4KE62A | 制造商:Microsemi Corporation 功能描述:TRANSIENT VOLTAGE SUPPRESSOR - Bulk |
發布緊急采購，3分鐘左右您將得到回復。